HDMI to DVI Cable 2m Black

TARGET HDMI 1.4 (M) to DVI-D (M) 2m Black OEM Display Cable | Reliable Digital Video Adapter

The TARGET HDMI 1.4 (M) to DVI-D (M) 2m Black OEM Display Cable delivers a direct digital video link between HDMI and DVI-D devices. Built for single-link DVI-D use, it features gold-flashed connectors and passive construction for stable signal transfer without external power.

Key Specifications

Single-Link Design for Reliable Digital Output

This cable supports HDMI 1.4 with Ethernet and connects via a 19-pin HDMI plug to a 24+1-pin DVI-D connector. The pins are mapped for single-link operation only, ensuring stable 1080p digital video without unnecessary complexity. Its passive design means no external power is needed, making installation quick and straightforward.

Gold-Flashed Contacts for Long-Term Signal Integrity

Gold-flashed contacts resist corrosion and maintain consistent conductivity over time. This is particularly useful for setups where the cable is frequently unplugged or exposed to varying environmental conditions. The durable black PVC jacket also protects against everyday wear.

Passive Cable Construction for Plug-and-Play Simplicity

Because this is a passive cable, it requires no drivers or external power source. Simply connect HDMI source to DVI-D display and power on. This makes it ideal for temporary setups, exhibitions, or situations where minimal hardware is preferred.

Check before you buy

• Confirm your DVI display supports DVI-D (single link) input only.
• Verify the HDMI source is HDMI 1.4 or earlier; HDMI 2.0 features are not supported.
• Check that your display resolution does not exceed single-link DVI bandwidth (typically 1920×1200@60Hz).
• Ensure the cable length is sufficient for your setup; passive cables can degrade over very long runs.

Box contents

• TARGET HDMI 1.4 (M) to DVI-D (M) 2m Black OEM Display Cable

Frequently Asked Questions

Frequently Asked Questions

Q: Can this cable support dual-link DVI resolutions?

A: No. This cable is single-link only; dual-link requires an active adapter.

Q: Does this cable carry audio signals?

A: No. DVI-D does not support audio; video only is transmitted.

Q: Is this cable HDCP compliant?

A: HDCP compliance is not specified; check with your source device for compatibility.

Q: Can I use this with a DVI-I port?

A: Only if the DVI-I port supports DVI-D single-link mode; otherwise it will not work.

The Consultant’s verdict & warranty

This TARGET HDMI 1.4 (M) to DVI-D (M) 2m Black OEM Display Cable is ideal for users needing a straightforward, single-link digital video connection without audio or advanced HDMI features. Its passive design and gold-flashed contacts make it a dependable choice for everyday use. Covered by the standard Manufacturer Warranty.