RJ45 CAT6 3m Black Network Cable

TARGET RJ45 (M) to RJ45 (M) CAT6 3m Black OEM Moulded Boot Copper UTP Network Cable

The TARGET RJ45 (M) to RJ45 (M) CAT6 3m Black OEM Moulded Boot Copper UTP Network Cable delivers reliable Gigabit Ethernet connectivity for home and office networks. This 3-metre black cable uses full copper conductors and CAT6 specification to support speeds up to 250 MHz, making it ideal for high-bandwidth applications where stable, interference-free data transmission is essential.

Slim Specs Table

Why CAT6 Matters for Your Network

CAT6 cable provides superior performance compared to older Cat-5 and Cat-5e standards, particularly in reducing crosstalk and system noise. The tighter specifications ensure cleaner signal transmission, which translates to more stable connections and fewer packet losses during data transfer. For users running multiple devices or streaming high-definition content across their network, this improved signal integrity makes a noticeable difference in everyday performance.

Full Copper Construction Advantage

Unlike CCA (Copper Clad Aluminium) alternatives, this cable uses solid copper conductors throughout. Copper offers better electrical conductivity and heat dissipation, resulting in more reliable connections over longer periods. The full copper construction also provides improved durability against bending and environmental stress, making it suitable for both permanent installations and flexible routing around furniture or through cable management systems.

Moulded Boot Protection Benefits

The OEM moulded boot design reinforces the connection points where the cable meets the RJ45 connectors. This construction method prevents the common failure points found in hand-crimped cables, where wires can pull away from terminals under stress. The moulded design also creates a snag-resistant profile that won’t catch on other cables or equipment during installation or maintenance.

3-Metre Length for Flexible Installation

The 3-metre length provides optimal reach for most desktop and small office setups without excessive cable management overhead. This length accommodates typical desk-to-wall socket distances while allowing enough slack for clean routing under desks or along baseboards. The black colourway ensures the cable blends discreetly with most office environments and furniture.

Box contents

• TARGET RJ45 (M) to RJ45 (M) CAT6 3m Black OEM Moulded Boot Copper UTP Network Cable

Check before you buy

• Confirm your network devices have standard RJ45 ports
• Verify your router/switch supports Gigabit Ethernet speeds
• Check that your existing network infrastructure uses compatible standards
• Ensure the 3-metre length suits your installation requirements

Frequently Asked Questions

Q: Is this cable suitable for Power over Ethernet (PoE)?

A: Yes, CAT6 cables support PoE applications, but verify your PoE device requirements.

Q: Can this cable be used outdoors?

A: No, this indoor-rated cable should not be exposed to outdoor elements or moisture.

Q: Does this cable support 10 Gigabit Ethernet?

A: CAT6 supports up to 10GBASE-T at shorter distances (55 metres), but check your specific requirements.

Q: What’s the difference between UTP and STP in this cable?

A: This cable uses UTP (Unshielded Twisted Pair), which is standard for most home and office networks.

Q: Is the cable backward compatible with Cat-5e devices?

A: Yes, CAT6 cables work with all previous Ethernet standards including Cat-5e and Cat-5.

The Consultant’s verdict & warranty

This TARGET CAT6 network cable represents a solid choice for users seeking reliable Gigabit Ethernet connectivity without premium pricing. The full copper construction, moulded boot design, and CAT6 certification make it suitable for both home networking and small office environments where stable, high-speed connections matter. Covered by the standard Manufacturer Warranty.