DeepCool FL12R-3 IN 1 Fan 3-pack
£68.47 inc VAT
28 in stock
More Ways to Pay
-
Buy now, pay later with Klarna
-
Pay in 3 interest-free payments with PayPal
About This Item
- Three 120mm ARGB fans with reversed blade design for uninterrupted lighting on both intake and exhaust
- 36 ARGB Gen2 LEDs with halo ring for enhanced aesthetics
- PWM control with 500-2150 RPM range delivering 55 CFM airflow and 2.59 mmAq pressure
- Fluid Dynamic Bearing ensures quiet operation at 33.9 dB(A) maximum noise
- 8-pin connector integrates PWM and ARGB SYNC for secure, simplified installation
- Enhanced PBT frame and polycarbonate blades with full-coverage rubber pads reduce vibration
- 3-pack configuration with 12V rated voltage and 1.8W power consumption per fan
1-3 Days
Delivery on orders over £100
£5.80
Free
Payment Methods:
DeepCool FL12R-3 | ARGB Triple Pack PC Case Fans
The DeepCool FL12R-3 IN 1 Computer case Fan 12 cm Black 3 pc(s) delivers high-performance cooling with stunning ARGB lighting in a convenient three-pack. Engineered for PC builders who want both exceptional airflow and eye-catching aesthetics, this set combines advanced PWM control, fluid dynamic bearing technology, and innovative reverse fan blade design for optimal cooling efficiency.
DeepCool FL12R-3 IN 1 Computer case Fan 12 cm Black 3 pc(s)
Slim Specs Table
| Metric | Spec |
|---|---|
| Fan Size | 120 x 120 x 25 mm |
| Airflow | 55 CFM / 93.45 m³/h |
| Noise Level | 33.9 dB(A) max |
| Bearing Type | Fluid Dynamic Bearing |
| LED | 36 ARGB Gen2 LEDs per fan |
Luminous ARGB Halo Ring Design
The FL12R-3 features 36 ARGB Gen2 LEDs arranged in a halo ring configuration, creating an immersive lighting effect that elevates any PC build. The reversed fan blade design eliminates the “cross” pattern visible on traditional fans, allowing you to use these as intake fans while maintaining a clean, uninterrupted RGB appearance from both sides. This thoughtful engineering means your build looks stunning regardless of fan orientation.
Uncompromised Cooling Performance
Equipped with fluid dynamic bearings, these fans deliver exceptional cooling performance while maintaining whisper-quiet operation. The PWM control allows automatic speed adjustment between 500-2150 RPM, providing powerful cooling when needed and silent operation during light loads. With a maximum airflow of 55 CFM and air pressure of 2.59 mmAq, these fans effectively dissipate heat from your components while keeping noise levels below 34 dB(A) at maximum speed.
Enhanced Durability and Stability
DeepCool has reinforced the FL12R-3 with enhanced composite materials, using PBT for the frames and polycarbonate for the fan blades. This combination provides superior structural integrity and dynamic balance compared to standard materials. The full-coverage rubber pads at each corner significantly reduce vibrations and eliminate noise caused by uneven mounting pressure, ensuring stable, quiet operation even under heavy load conditions.
Box Contents
- 3 x DeepCool FL12R-3 120mm ARGB PWM fans
- 8-pin PWM/ARGB connectors (integrated)
- Mounting hardware (where applicable)
Check before you buy
- Confirm your case has available 120mm fan mounting points
- Verify your motherboard supports 4-pin PWM fan headers
- Check if your ARGB controller uses 3-pin or 5V 3-pin connectors
- Ensure your power supply can provide the 1.8W per fan requirement
Frequently Asked Questions
Q: Can these fans be daisy-chained together?
A: Yes, the integrated 8-pin connectors allow for easy daisy-chaining of multiple fans.
Q: Are these fans compatible with all ARGB sync systems?
A: They use standard 3-pin ARGB connectors and should work with most major motherboard ARGB sync software.
Q: What’s the benefit of fluid dynamic bearings?
A: FDB technology offers longer lifespan, quieter operation, and better reliability compared to sleeve or ball bearings.
Q: Can I control the fan speed manually?
A: Yes, PWM support allows for automatic speed control or manual adjustment through compatible software.
Q: Do these fans come with anti-vibration mounts?
A: Yes, full-coverage rubber pads are integrated into the corners of each fan.
The Consultant’s Verdict & Warranty
The DeepCool FL12R-3 IN 1 Computer case Fan 12 cm Black 3 pc(s) represents an excellent choice for PC builders seeking a balance of performance, aesthetics, and value. The combination of high airflow, quiet operation, and striking ARGB lighting makes these fans ideal for gaming rigs, workstations, or any build where cooling and visual appeal matter equally. The three-pack configuration offers convenient installation across multiple case locations. Covered by the standard Manufacturer Warranty, these fans provide reliable cooling backed by DeepCool’s engineering expertise.
| Performance | |
|---|---|
| Suitable location | Computer case |
| Fan connector | 4-pin |
| Pulse-width modulation (PWM) support | Yes |
| Rotational speed (min) | 500 RPM |
| Rotational speed (max) | 2150 RPM |
| Bearing type | Fluid Dynamic Bearing (FDB) |
| Noise level (high speed) | 33.9 dB |
| Type | Fan |
| Fan diameter | 12 cm |
| Maximum airflow | 55 cfm |
| Maximum air pressure | 2.59 mmH2O |
| Airflow | 93.45 m³/h |
| Quantity per pack | 3 pc(s) |
| Design | |
| Fan connector | 4-pin |
| Product colour | Black |
| Illumination LED | Yes |
| LED connector type | 3-pin |
| Technical details | |
| Noise level (high speed) | 33.9 dB |
| Type | Fan |
| Fan diameter | 12 cm |
| Maximum airflow | 55 cfm |
| Maximum air pressure | 2.59 mmH2O |
| Airflow | 93.45 m³/h |
| Fan connector | 4-pin |
| Illumination LED | Yes |
| Ports & interfaces | |
| Fan connector | 4-pin |
| Power | |
| Rated voltage | 12 V |
| Rated current | 0.15 A |
| Power consumption (typical) | 1.8 W |
| LED voltage | 5 V |
| Colour | |
| Product colour | Black |
| Weight & dimensions | |
| Fan dimensions (W x D x H) | 120 x 120 x 25 mm |
| Weight | 543 g |
| Other features | |
| LED voltage | 5 V |
Reviews
Clear filtersThere are no reviews yet.