DrayTek DCX101 Network Switch

Draytek DAC-CX10 Cable | High-Speed SFP Interconnect

The Draytek DCX101 DAC-CX10 SFP cable is a cost-effective 1M interconnect solution for high-speed networking between switches, routers, servers, and storage devices. Supporting speeds up to 10Gb/s, this direct attach cable simplifies connections by eliminating the need for separate transceivers and fibre optics.

Key Specifications

Direct Connection Eliminates Transceiver Costs

The DAC-CX10 connects directly to SFP module ports on compatible devices, functioning similarly to an RJ-45 network cable but with significantly higher bandwidth potential. This design eliminates the expense and complexity of using separate SFP-to-fibre or SFP-to-RJ-45 transceivers. For example, when connecting two devices with 10Gb/s SFP+ support, simply plug the DAC-CX10 between them for an immediate high-speed link without additional hardware.

Secure Locking Mechanism Prevents Accidental Disconnection

The DAC-CX10 module locks securely into place when inserted into SFP ports, preventing unintended removal during operation. To disconnect, simply pull the release tab to unlock it from the SFP module slot. This secure fit ensures reliable operation in environments where vibration or cable movement might otherwise cause connection issues.

Bandwidth Optimised for High-Volume Applications

When connecting between devices that support 10Gb/s SFP ports, the DAC-CX10 delivers significantly higher bandwidth than standard RJ-45 Ethernet/CAT6 connections. This performance advantage is particularly valuable for high-volume applications such as server-to-switch or storage-device-to-network connections where data throughput is critical. The actual speed achieved depends on the capabilities of the connected devices.

Versatile Port Utilisation Strategy

The DAC-CX10 offers flexibility in network design by freeing up RJ-45 ports for other uses. Even when connecting to 1Gb/s SFP ports, these cables can be useful for maximising port availability without consuming standard Ethernet connections needed elsewhere. Additionally, if both connected devices support port trunking, using two DAC-CX10 cables can further increase available bandwidth.

Box contents

• Draytek DAC-CX10 SFP DAC cable (1M length)

Check before you buy

• Confirm your devices have compatible SFP or SFP+ ports
• Verify maximum supported speed of connected equipment
• Check whether your networking equipment supports port trunking if planning to use multiple cables
• Confirm you need the 1M length (3M variant also available)

Frequently Asked Questions

Q: What devices are compatible with the Draytek DCX101 cable?

A: Any Draytek switch or router with SFP or SFP+ ports, plus other compatible networking equipment.

Q: Can this cable be used for 1Gb/s connections?

A: Yes, the cable works with 1Gb/s ports but will be limited to that speed by the connected device.

Q: Is this cable suitable for outdoor use?

A: The cable is designed for indoor networking applications and should be protected from environmental exposure.

Q: How do I connect the DAC-CX10 cable?

A: Simply plug the cable directly into the SFP/SFP+ ports on both devices until it locks securely in place.

Q: Can I use this cable to connect different brands of equipment?

A: Yes, as long as both devices have compatible SFP/SFP+ ports, regardless of manufacturer.

The Consultant’s verdict & warranty

The Draytek DCX101 DAC-CX10 cable offers a practical, cost-effective solution for high-speed networking between compatible SFP-equipped devices. Its direct-connect design eliminates the need for separate transceivers while maintaining reliable performance up to 10Gb/s. This cable is particularly suited for network administrators looking to simplify infrastructure and reduce hardware costs in server rooms, data centres, or enterprise networking environments. Covered by the standard Manufacturer Warranty.