Team Group ELITE DDR5 32GB 2x16GB memory module
Out of stock
More Ways to Pay
-
Buy now, pay later with Klarna
-
Pay in 3 interest-free payments with PayPal
About This Item
- 32 GB DDR5 memory kit (2 x 16 GB modules)
- 4800 MHz clock speed with 40 CAS latency
- 1.1 V operating voltage for improved energy efficiency
- 288-pin DIMM form factor with black heatsink design
- Unbuffered ECC support for enhanced system stability
1-3 Days
Delivery on orders over £100
£5.80
Free
Payment Methods:
Team Group ELITE TED532G4800C40DC01 | High-Performance DDR5 Memory Kit
The Team Group ELITE TED532G4800C40DC01 memory module is a 32 GB DDR5 kit (2 x 16 GB) designed for PC and server systems requiring high-speed memory with improved stability. Operating at 4800 MHz with a low 1.1 V voltage, it delivers faster performance and better energy efficiency compared to DDR4 modules.
Key Specifications
| Metric | Spec |
|---|---|
| Memory Type | DDR5 |
| Capacity | 32 GB (2 x 16 GB) |
| Speed | 4800 MHz |
| CAS Latency | 40 |
| Voltage | 1.1 V |
| Form Factor | 288-pin DIMM |
| ECC Support | On-Die ECC |
Ultra-High Frequency for Faster Computing
With a minimum specification of 4800 MHz, this DDR5 kit delivers a 50% speed increase over standard DDR4 modules operating at 3200 MHz. The higher frequency allows systems to process data more quickly, reducing load times and improving responsiveness during demanding tasks.
Enhanced Multitasking with Greater Capacity
Available from 16 GB per module and expandable up to 128 GB per module in compliance with JEDEC standards, this kit provides ample headroom for intensive multitasking. Whether running virtual machines, editing large media files, or managing complex datasets, the increased capacity ensures smooth operation without memory bottlenecks.
Improved Architecture for Better Efficiency
DDR5 technology introduces 32 banks (up from 16 in DDR4), organised into 8 bank groups, doubling access availability for concurrent operations. The burst length is also doubled, allowing more data to be accessed per read/write command. These structural improvements translate to faster data throughput and reduced latency.
Lower Voltage for Better Energy Efficiency
Operating at 1.1 V instead of the 1.2 V required by DDR4, this kit reduces power consumption per bandwidth unit. Power management has moved from the motherboard to the memory module itself, with integrated PMIC (Power Management IC) to minimise noise interference and optimise system load handling.
On-Die ECC for Enhanced Stability
The on-die ECC (Error Correction Code) feature automatically detects and corrects memory errors in real time, providing greater system stability for applications where data integrity is critical. This is particularly valuable in server environments or professional workstations running 24/7 operations.
Box Contents
- 2 x Team Group ELITE TED532G4800C40DC01 16 GB DDR5 memory modules
- Heatsink cooling solution (black finish)
Check Before You Buy
- Confirm your motherboard supports DDR5 memory and 288-pin DIMM slots
- Verify your system BIOS is updated to support DDR5 modules
- Check maximum supported memory capacity for your specific motherboard model
- Ensure your CPU is compatible with DDR5 memory (check manufacturer specifications)
Frequently Asked Questions
Q: Is this memory compatible with my DDR4 motherboard?
A: No, DDR5 memory is not compatible with DDR4 motherboards. Your system must specifically support DDR5.
Q: What does the heatsink do?
A: The heatsink helps dissipate heat from the memory modules, maintaining stable performance during extended use.
Q: Can I mix this with my existing DDR4 memory?
A: No, DDR5 and DDR4 are not compatible and cannot be mixed in the same system.
Q: What is CAS latency and why is 40 important?
A: CAS latency is the delay time between when a memory controller requests data and when it’s available. Lower is generally better, but DDR5 at higher speeds often has higher CAS latency than DDR4.
Q: Does this memory require special installation?
A: Installation is similar to other DIMM modules – ensure your system is powered off and properly grounded before installation.
The Consultant’s Verdict & Warranty
The Team Group ELITE TED532G4800C40DC01 represents a solid upgrade for users building new systems or upgrading to DDR5 technology. Its combination of high capacity, improved architecture, and on-die ECC makes it suitable for both gaming enthusiasts and professional users requiring reliable performance. Covered by the standard Manufacturer Warranty.
| Power | |
|---|---|
| Memory voltage | 1.1 V |
| Design | |
| Product colour | Black |
| Cooling type | Heatsink |
| Technical details | |
| Product colour | Black |
| Cooling type | Heatsink |
| Memory | |
| Buffered memory type | Unregistered (unbuffered) |
| Memory layout (modules x size) | 2 x 16 GB |
| Internal memory | 32 GB |
| Component for | PC/Server |
| Memory form factor | 288-pin DIMM |
| CAS latency | 40 |
| Memory voltage | 1.1 V |
| Memory clock speed | 4800 MHz |
| Internal memory type | DDR5 |
| Features | |
| On-Die ECC | Yes |
| Buffered memory type | Unregistered (unbuffered) |
| Product colour | Black |
| Memory layout (modules x size) | 2 x 16 GB |
| Internal memory | 32 GB |
| Component for | PC/Server |
| Memory form factor | 288-pin DIMM |
| CAS latency | 40 |
| Memory voltage | 1.1 V |
| Cooling type | Heatsink |
| Memory clock speed | 4800 MHz |
| Internal memory type | DDR5 |
| Weight & dimensions | |
| Width | 134 mm |
| Height | 32 mm |

Reviews
Clear filtersThere are no reviews yet.