TP-Link TL-POE10R PoE Splitter Black

TP-Link TL-POE10R | IEEE 802.3af PoE Splitter

The TP-Link TL-POE10R is a compact Power over Ethernet splitter that separates data and power from a PoE-enabled source, letting you install non-PoE devices like IP cameras, wireless access points, or IP phones in locations without nearby power outlets. Fully IEEE 802.3af compliant, it works with any standard PoE switch or injector to deliver clean power and network connectivity over a single cable.

Key Specifications

Simple installation for remote devices

Because the TL-POE10R is plug-and-play, you can connect it directly to any IEEE 802.3af PoE injector or switch without configuration. The device splits the incoming PoE signal into a separate data line and a DC power jack, so you can power and connect non-PoE equipment wherever a single Ethernet cable can reach.

Flexible power options for varied devices

With selectable 5V, 9V, or 12V DC output, the splitter supports a range of low-power devices. This flexibility means you can match the correct voltage to your camera, access point, or phone without needing a separate power adapter at the installation point.

Robust and compact for indoor use

Built to operate between 0 and 40 °C with humidity from 10 to 90 %, the TL-POE10R is suited to typical indoor environments. Its small footprint—under 90 mm wide—lets it sit unobtrusively near your device or mount inside a small enclosure.

LED power indicator for quick status check

A single LED shows when the unit is powered and receiving PoE input, making it easy to confirm operation without needing to check connected devices. This simple feedback is useful during installation and troubleshooting.

Box contents

• TP-Link TL-POE10R PoE splitter
• Quick installation guide

Check before you buy

• Confirm your PoE source is IEEE 802.3af compliant.
• Verify your non-PoE device’s voltage requirement (5V, 9V, or 12V).
• Check that your device’s power draw is within the splitter’s capacity (typically under 12.95 W).
• Ensure the splitter will be used in an indoor environment within the specified temperature range.

Frequently Asked Questions

Q: Can I use this with any PoE switch?

A: Yes, as long as the switch complies with IEEE 802.3af standards.

Q: Does it support Gigabit Ethernet?

A: Yes, it supports IEEE 802.3ab (1000BASE-T) for Gigabit speeds.

Q: Is the DC output polarity protected?

A: The input is protected, but always confirm your device’s polarity requirements before connecting.

Q: Can I mount it outdoors?

A: No, it is designed for indoor use only within the specified temperature and humidity ranges.

The Consultant’s verdict & warranty

The TP-Link TL-POE10R is ideal for installers and IT professionals who need to power non-PoE devices in locations without convenient power access. Its IEEE 802.3af compliance, selectable voltage outputs, and compact design make it a reliable, no-fuss solution for IP cameras, access points, and VoIP phones. Covered by the standard Manufacturer Warranty.