Cables Direct FB2S-LCLC-100Y 10m LC-LC Yellow fibre optic cable

Cables Direct FB2S-LCLC-100Y | 10m Single-Mode Duplex LC-to-LC

The Cables Direct FB2S-LCLC-100Y fibre optic cable 10 m 2x LC Yellow is a duplex patch lead for short-reach data links. It uses single-mode fibre with LC connectors and an LSZH jacket. This cable suits UK network racks requiring low-smoke performance. It supports 1 Gbit/s over 10 metres with a tight bend radius.

Cables Direct FB2S-LCLC-100Y fibre optic cable 10 m 2x LC Yellow

This section confirms the exact model for procurement and installation checks. It is a 10-metre duplex patch cable with LC male connectors at both ends. The yellow LSZH jacket aids cable identification in dense patch panels. Verify connector polish and adapter type before ordering.

Single-mode fibre for structured cabling

The 9 µm core and 125 µm cladding support OS2 single-mode performance. In practice, this reduces modal dispersion for stable 1 Gbit/s links. Use it for backbone runs or switch-to-switch jumps within a cabinet.

LC connectors for high-density patching

LC connectors offer a small form factor for dense patch panels. They are push-pull and latch securely in standard couplers. Also, the duplex clip keeps pairs organised and reduces polarity errors.

LSZH jacket for indoor safety

The low smoke zero halogen jacket limits toxic fumes during fire. Because of this, it is suitable for offices and public buildings. However, confirm local fire regulations for containment routes.

10 m length with 40 mm bend radius

A 10-metre length supports common rack and aisle spans. The 40 mm bending radius protects the glass from stress loss. So, avoid tight zip-tie pulls and sharp corners.

Operating temperature and environment

The cable operates from -60 °C to +85 °C. This range covers most UK indoor environments and external cabinets. Also, verify that the enclosure meets your site’s thermal profile.

Duplex support for bidirectional links

The duplex design supports bidirectional transmission over separate fibres. It suits simple point-to-point links without media converters. However, confirm transceiver compatibility at both ends.

Package contents

• 1 x Cables Direct FB2S-LCLC-100Y 10 m duplex fibre optic cable (LC to LC, yellow LSZH)

Things to check first

• Confirm the transceiver type matches LC simplex or duplex adapters.
• Verify the patch panel port spacing supports LC duplex clips.
• Check that the link distance is within 10 m for 1 Gbit/s.
• Confirm compliance requirements such as UKCA or CE for your site.

Frequently Asked Questions

Summary & warranty

Choose this cable for short single-mode links inside UK cabinets and offices. It suits buyers needing LC duplex patching with LSZH safety and 1 Gbit/s support. Covered by the applicable manufacturer warranty.