Corsair 3200D RS Midi Tower White
Original price was: £85.19.£80.39Current price is: £80.39.
In stock
In stock
-
DPD tracked delivery
-
Buy now, pay later with Klarna
-
Pay in 3 instalments with PayPal
About This Item
- White Midi Tower PC case with tempered glass side window
- Supports ATX, Mini-ITX and micro ATX motherboards
- Room for GPUs up to 40 cm and CPU coolers up to 16.5 cm
- Storage includes one 3.5-inch and two 2.5-inch drive bays
- Liquid cooling support with radiators up to 360 mm front, top and 120 mm rear
- Seven expansion slots with bottom-mounted ATX PSU (not included)
- What to check: maximum PSU length 18 cm and front I/O includes USB 3.2 Gen 2×2 Type-C
You may also like
CIT Jet Stream Mid Tower Case with 500W PSU
In stock
Antec FLUX Mid Tower PC Case with Tempered Glass and 5 PWM Fans
In stock
DeepCool CG530 Dual-Chamber Tempered Glass Case
In stock
Corsair 3200D RS | Midi Tower Case with White Finish
The Corsair 3200D RS Midi Tower White is a spacious chassis built for modern high-end GPUs. It targets UK builders who want strong airflow and clean cable management. This case supports ATX, Micro-ATX, and Mini-ITX motherboards. It also features a tempered glass side panel to showcase internal components. With room for large graphics cards and multiple cooling options, it suits performance-focused builds.
Slim Specifications
| Metric | Spec. |
|---|---|
| Form Factor | Midi Tower |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 165 mm |
| Front Radiator Support | 360, 280, 240 mm |
| Weight | 8.5 kg |
GPU Clearance and Cooling Layout
The chassis offers 375mm of clearance for graphics cards with front fans installed. This accommodates even the largest next-gen GPUs. The PSU shroud includes two 120mm fan mounts. The front mount is angled to direct airflow straight at the GPU. This design helps maintain lower temperatures during intensive gaming or rendering sessions.
Included RS120 PWM Fan System
Three RS120 PWM fans are included with magnetic dome bearings. These fans reduce friction and mechanical noise effectively. You can daisy-chain them sequentially for a direct-to-motherboard connection. This requires only a single 4-pin PWM header, reducing cable clutter. The system balances high airflow with a low acoustic footprint.
Cable Management and Build Cleanliness
The 3200D supports reverse-connector motherboards for a streamlined look. A built-in cable shroud hides routing paths. Ample tie-down points are provided throughout the chassis. These features help you achieve a super-clean internal layout. Proper cable management improves airflow and maintenance access.
Dust Protection and Daily Performance
Anti-dust filters are fitted to reduce internal buildup. The case design focuses on directing airflow where it is needed most. Every detail aims to maintain optimal system performance over time. The tempered glass panel lets you monitor components easily. This supports long-term reliability for daily use.
Box contents
- Corsair 3200D RS Midi Tower White case
- Three RS120 PWM fans
- Installation hardware and screws
- User documentation
Check before you buy
- Confirm your motherboard fits ATX, Micro-ATX, or Mini-ITX standards.
- Verify your graphics card length is under 400 mm.
- Check your CPU cooler height does not exceed 165 mm.
- Ensure your PSU is ATX form factor and under 180 mm in length.
Common questions
Does the case include a power supply?
What radiator sizes are supported for liquid cooling?
How many storage drives can I install?
Is the side panel tempered glass?
What USB ports are on the front panel?
The bottom line
Choose the Corsair 3200D RS Midi Tower White if you need a spacious, white case for a high-performance GPU build. It suits UK users who value quiet cooling and tidy internals. This case is ideal for ATX or smaller motherboards with large graphics cards. Covered by the applicable manufacturer warranty.
| Number of 3.5 bays | 1 |
|---|---|
| Number of 2.5 bays | 2 |
| Supported motherboard form factors | ATX, Mini-ATX, micro ATX |
| Supported HDD sizes | 3.5,2.5″ |
| Side window | Yes |
| Product colour | White |
| Number of expansion slots | 7 |
| Maximum CPU cooler height | 16.5 cm |
| Maximum graphics card length | 40 cm |
| Maximum PSU length | 18 cm |
| Type | PC |
| Form factor | Midi Tower |
| Material | Plastic, Steel |
| Anti-dust filter | Yes |
| Tempered glass panels | Yes |
| Supported power supply form factors | ATX |
| Power supply included | No |
| Power supply location | Bottom |
| USB 3.2 Gen 2x2 Type-C ports quantity | 1 |
| USB 2.0 ports quantity | 1 |
| Combo headphone/mic port | Yes |
| Front radiator sizes supported | 360,280,240 mm |
| Rear radiator sizes supported | 120 mm |
| Top radiator sizes supported | 360,280,240 mm |
| Number of front fans supported max | 3 |
| Front fans diameters supported | 120,140 mm |
| Number of rear fans supported max | 1 |
| Rear fans diameters supported | 120 mm |
| Number of top fans supported max | 3 |
| Top fans diameters supported | 120,140 mm |
| Number of bottom fans supported max | 2 |
| Bottom fans diameters supported | 120 mm |
| Liquid cooling capability | Yes |
| Width | 219 mm |
| Depth | 458 mm |
| Height | 495 mm |
| Weight | 8.5 kg |
| Distributor SKUs | 127957, CLCC-9011335-WW |
Reviews
Clear filtersThere are no reviews yet.