StarTech.com 3m CAT6a LSZH Blue S/FTP Patch Cord – 10GbE 500MHz PoE++

StarTech.com 3m CAT6a Ethernet Cable | Blue LSZH 10GbE

The StarTech.com 3m CAT6a Ethernet Cable – Blue – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord is built for UK network installations requiring high speed and safety. This cable supports 10GBase-T data transfer up to 10,000 Mbit/s. It is ideal for connecting PoE++ devices in offices or data closets. Because it uses Low Smoke Zero Halogen jacketing, it offers improved safety over standard PVC cables.

Technical Specifications at a Glance

Certified Low Smoke Zero Halogen Safety

This cable features a Low Smoke Zero Halogen (LSZH) jacket. In the event of a fire, LSZH materials produce limited smoke and no halogen compounds. This reduces toxic fume emissions, which helps maintain visibility during evacuation. It is a practical choice for UK commercial buildings with strict fire safety requirements.

10GbE Performance with S/FTP Shielding

The cable uses S/FTP (Shielded Foiled Twisted Pair) construction. This provides robust protection against electromagnetic interference (EMI) and alien crosstalk. Because the conductors are copper and sized at 27 AWG, the signal integrity remains stable over the full 3-metre run. This supports reliable 10GBase-T networking.

100W PoE++ Power Delivery

It supports IEEE 802.3bt (PoE++) standards, delivering up to 100 W of power. This allows you to power high-draw devices like PTZ cameras or access points directly over the network cable. You can reduce cable clutter by eliminating separate power adapters for Type 4 PoE devices.

Snagless RJ-45 with Strain Relief

The connectors feature molded snagless boots. These protect the RJ-45 latch from catching on cable ties or rack edges during installation. Integrated strain reliefs at the connector head prevent sharp bends. This reduces the risk of conductor damage or disconnection in high-traffic areas.

Box contents

• 1 x StarTech.com 3m Blue CAT6a S/FTP LSZH Patch Cable

Check before you buy

• Confirm your switch or router supports IEEE 802.3bt (PoE++) for 100 W power delivery.
• Verify that your rack or patch panel spacing accommodates standard RJ-45 snagless boots.
• Ensure your network devices support 10GBase-T to utilise the full 10,000 Mbit/s speed.
• Check local UK building regulations for LSZH cable requirements in your installation area.

Frequently Asked Questions

Q: Is this cable suitable for outdoor use?

A: No, the LSZH jacket is designed for indoor use. It is not rated for direct sunlight or moisture exposure.

Q: Does this cable come with a warranty?

A: Yes, this product is backed for life, including free lifetime 24/5 multi-lingual technical assistance.

Q: Can I use this cable with standard Cat6 connectors?

A: It is a terminated patch cable. It uses standard RJ-45 connectors, but it is not intended for field termination.

Q: Is the cable shielded?

A: Yes, it uses S/FTP (S-STP) shielding for protection against electromagnetic interference.

Q: What is the maximum data rate supported?

A: It supports up to 10,000 Mbit/s (10 Gigabit Ethernet) over the 3-metre length.

The Consultant’s verdict & warranty

This cable is a strong choice for UK IT professionals upgrading to 10GbE networks with PoE++ devices. It suits environments where fire safety standards demand Low Smoke Zero Halogen materials. The shielding and snagless design ensure reliable performance in dense rack installations. Covered by the standard Manufacturer Warranty.