StarTech.com 3m CAT6a LSZH White S/FTP Ethernet Cable – 10GbE 500MHz PoE++

StarTech.com 3m CAT6a LSZH Cable | 10GbE Snagless Patch

The StarTech.com 3m CAT6a Ethernet Cable – White – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord is built for modern UK networks. It suits installers needing robust fire safety and high-power device support. This cable delivers 10GbE performance with strong EMI protection.

Slim Specs Table

Certified Low-Smoke Zero-Halogen Safety

This cable uses an LSZH jacket. It produces low levels of corrosive fumes and smoke if exposed to fire. This improves visibility during building evacuations. It is a safer choice than standard PVC cables for enclosed spaces. You should confirm local building code compliance for your specific installation.

10GbE Performance with S/FTP Shielding

The cable supports 10GBase-T networks. It uses S/FTP shielding to block electromagnetic interference. This prevents signal loss near other cables or electrical sources. The 500 MHz frequency rating handles high-bandwidth tasks. This ensures stable data transmission over the full 3-metre run.

100W PoE++ for High-Power Devices

This patch cord supports IEEE 802.3bt-2018 PoE++. It delivers up to 100 W to power demanding devices. This is ideal for high-performance Wi-Fi access points or PTZ cameras. The cable uses copper conductors for efficient power delivery. You should verify your switch and device support PoE++ Type 4.

Snagless Connectors with Strain Relief

The RJ-45 connectors feature snagless boots. These protect the latch from catching on cable bundles during installation. Integrated strain reliefs reduce stress at the connector junction. This helps prevent premature cable failure. The design is ETL verified for performance.

Box contents

• 1 x StarTech.com 3m CAT6a Ethernet Cable (White)

Check before you buy

• Confirm your switch and device support 10GbE (10GBase-T) speeds.
• Verify your PoE source supports IEEE 802.3bt (PoE++) for 100W power.
• Check the installation environment requires LSZH jacket material.
• Ensure the 3-metre length is suitable for your rack or desk layout.

Frequently Asked Questions

Q: Is this cable compatible with Cat5e or Cat6 ports?

A: Yes. It is backward compatible with Cat5e and Cat6 devices, but speed will be limited to the lowest standard.

Q: Can I use this cable outdoors?

A: This LSZH cable is designed for indoor use. For outdoor runs, you must confirm a UV-resistant or direct-burial rated cable.

Q: Does this cable require a separate ground wire?

A: No. The S/FTP shielding grounds through the RJ-45 connector metal shell when plugged into a grounded port.

Q: Is the connector angled or straight?

A: Both connectors have a straight form factor. This is standard for patch panels and most network devices.

Q: What is the conductor gauge?

A: The cable uses 27 AWG stranded copper conductors. This balances flexibility with performance for patch cord lengths.

The Consultant’s verdict & warranty

This cable is a strong choice for UK businesses upgrading to 10GbE infrastructure. It is ideal for offices, schools, or data centres where fire safety and PoE++ power are priorities. The snagless design simplifies installation in crowded racks. Covered by the standard Manufacturer Warranty.