Kanguru Defender SED300 Hardware-Encrypted SATA SSD, 500 GB, 2.5″, FIPS 140-2 Level 2 Certified
£928.12
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 500 GB capacity with 3D TLC memory
- Sequential read speeds up to 550 MB/s
- Sequential write speeds up to 520 MB/s
- Always-on 256-bit AES hardware encryption
- FIPS 140-2 Level 2 and FIPS 197 certified
- 2.5-inch SATA SSD for PCs and laptops
- TAA compliant for government procurement
You may also like
Kanguru Defender SED300 – protect data at rest
The Kanguru Defender SED300 suits organisations and users who need secure storage in a PC or laptop. Its always-on, 256-bit AES hardware encryption protects data at rest without relying on software encryption.
Core specifications for secure storage
| Metric | Specification |
|---|---|
| Capacity | 500 GB |
| Form factor | 2.5-inch |
| Interface | SATA |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 520 MB/s |
| Encryption and certification | 256-bit AES hardware encryption; FIPS 140-2 Level 2 and FIPS 197 certified |
Hardware encryption with pre-boot authentication
The drive encrypts data using its dedicated hardware processor. Pre-boot authentication helps keep the operating system and stored files locked until the user authenticates.
Because encryption runs in hardware, it avoids the performance bottlenecks associated with software-based encryption. The drive also has secure firmware with a digital signature and a tamper-resistant epoxy coating over the cryptographic controller and flash storage.
Manage deployment across your organisation
Kanguru Opal Commander provides drive details, lock status and management functions. Administrators can also use provisioning tools to configure security policies for deployment across a workforce.
FIPS 140-2 Level 2 certification and TAA compliance make this drive relevant to security-focused organisations and government purchasing requirements. Check that these standards match your organisation’s specific requirements.
Check your system before ordering
- Confirm your PC or laptop accepts an internal 2.5-inch SATA SSD.
- Check that your system provides a compatible SATA connection.
- Confirm that 500 GB suits your storage requirements.
- Check that pre-boot authentication and drive management fit your security setup.
Frequently Asked Questions
Q: What encryption does this SSD use?
A: It uses always-on, hardware-based 256-bit AES encryption and is FIPS 197 certified.
Q: What is the drive’s sequential read speed?
A: Its sequential read speed is up to 550 MB/s.
Q: Which devices is this SSD designed for?
A: It is an internal SATA SSD for PCs and laptops with a compatible 2.5-inch drive bay.
Q: Is this drive TAA compliant?
A: Yes. The drive is TAA compliant and FIPS 140-2 Level 2 certified.
A practical choice for protected PC storage
Choose the Kanguru Defender SED300 when you need a 500 GB SATA SSD with hardware encryption, pre-boot authentication and certified security. Its 2.5-inch form factor suits compatible PCs and laptops, while its management tools support organisational deployment.
| Hard drive | |
|---|---|
| SSD capacity | 500 GB |
| Memory type | 3D TLC |
| Data transmission | |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Random write (4KB) | 90000 IOPS |
| Random read (4KB) | 99000 IOPS |
| Security | |
| Security algorithms | 256-bit AES, FIPS 140-2, FIPS 197 |
| Features | |
| Interface | Serial ATA |
| Component for | PC/Laptop |
| Sequential write speed (CDM) | 520 MB/s |
| Sequential read speed (CDM) | 550 MB/s |
| End-to-End Data Protection | Yes |
| SSD capacity | 500 GB |
| Security algorithms | 256-bit AES, FIPS 140-2, FIPS 197 |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 90000 IOPS |
| Random read (4KB) | 99000 IOPS |
| Hardware encryption | Yes |
| Certification | • FIPS 140-2 Certified, Level 2 • FIPS 197 Certified “Always On” 256-Bit AES Hardware Encryption • TAA Compliant |
| SSD form factor | 2.5" |
| Target workload | Mixed Use (MU) |
| Export Control Classification Number (ECCN) | 5060220255111 |
| Certificates | |
| Certification | • FIPS 140-2 Certified, Level 2 • FIPS 197 Certified “Always On” 256-Bit AES Hardware Encryption • TAA Compliant |
| Performance | |
| Interface | Serial ATA |
| Component for | PC/Laptop |
| Sequential write speed (CDM) | 520 MB/s |
| Sequential read speed (CDM) | 550 MB/s |
| End-to-End Data Protection | Yes |
| SSD capacity | 500 GB |
| Security algorithms | 256-bit AES, FIPS 140-2, FIPS 197 |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| ECC | Yes |
| Memory type | 3D TLC |
| Random write (4KB) | 90000 IOPS |
| Random read (4KB) | 99000 IOPS |
| Hardware encryption | Yes |
| Design | |
| Component for | PC/Laptop |
| Certification | • FIPS 140-2 Certified, Level 2 • FIPS 197 Certified “Always On” 256-Bit AES Hardware Encryption • TAA Compliant |
| SSD form factor | 2.5" |
| Weight & dimensions | |
| Weight | 18 g |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Technical details | |
| Interface | Serial ATA |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| ECC | Yes |
| Hardware encryption | Yes |
| SSD form factor | 2.5" |
| Warranty period | 3 years |
| Other features | |
| Warranty period | 3 years |
| Logistics data | |
| Export Control Classification Number (ECCN) | 5060220255111 |
| Identifiers | |
| Additional EANs | 0705110115346 |
Reviews
Clear filtersThere are no reviews yet.