StarTech.com 50cm CAT6a LSZH S/FTP White Patch Cable – 10GbE 500MHz PoE++
£9.54 inc VAT
In stock
In stock
More Ways to Pay
-
Buy now, pay later with Klarna
-
Pay in 3 interest-free payments with PayPal
About This Item
- White 0.5m LSZH CAT6a S/FTP patch cable
- 500MHz 10GBase-T 10000 Mbit/s data transfer
- 100W PoE++ (IEEE 802.3bt) support
- 27 AWG stranded copper conductors
- Snagless RJ-45 male connectors with strain relief
- CE and RoHS compliance
Payment Methods:
You may also like
StarTech.com 50cm CAT6a White LSZH Cable | 10GbE Snagless Patch
The StarTech.com 50cm CAT6a Ethernet Cable – White – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord is built for dense network racks. It delivers 10GbE performance with robust EMI shielding. This cable supports PoE++ devices up to 100W. The LSZH jacket improves safety in public buildings. It suits UK data centres and modern offices.
Specification Overview
| Metric | Spec. |
|---|---|
| Cable Standard | Cat6a |
| Data Transfer Rate | 10,000 Mbit/s |
| Cable Length | 0.5 m |
| Jacket Material | Low Smoke Zero Halogen (LSZH) |
| PoE Support | PoE++ (100 W) |
| Shielding | S/FTP (S-STP) |
10GbE Performance with S/FTP Shielding
This cable supports 10GBase-T over a short 0.5m run. The S/FTP shielding reduces electromagnetic interference. It also limits alien crosstalk in crowded racks. So your connection stays stable near power devices. The 500 MHz frequency rating meets CAT6a demands. Use it for switches, servers, and NAS links.
PoE++ Power for High-Demand Devices
It complies with IEEE 802.3bt-2018 for PoE++. This supports 100W power delivery to Type 4 devices. For example, it can power advanced APs or PTZ cameras. The stranded copper conductors handle frequent flex. In practice, this reduces wear in tight racks. Always confirm your switch supports 100W PoE++.
LSZH Safety for UK Buildings
The Low Smoke Zero Halogen jacket reduces toxic fumes. In a fire, it limits smoke and corrosive gases. This improves evacuation visibility for staff and responders. It is more eco-friendly than standard PVC jackets. Also check local building regulations for LSZH use. This cable suits offices, schools, and public spaces.
Snagless RJ-45 with Strain Relief
The snagless boot protects the RJ-45 latch during routing. It prevents clips catching on cable bundles. Integrated strain relief reduces sharp bend angles. This helps maintain signal integrity at the connector. The connectors are straight and male on both ends. They suit standard RJ-45 ports without adapters.
ETL Verified and Compliance
The cable is ETL Verified to ANSI/TIA-568.2-D. Independent testing confirms insertion loss and crosstalk limits. The STP shielding is verified for EMI resistance. It carries CE and RoHS compliance certificates. However, UKCA status is not specified. Confirm regional marking needs with your procurement team.
Package contents
- 1 x StarTech.com 50cm CAT6a White LSZH Cable with snagless RJ-45 connectors
Things to check first
- Confirm your switch or device supports 100W PoE++ (IEEE 802.3bt).
- Verify your patch panel ports accept standard RJ-45 straight connectors.
- Check LSZH requirements for your building’s fire safety policy.
- Confirm UKCA marking if required for your installation site.
Frequently Asked Questions
Is this cable compatible with 10GbE switches?
Does it support PoE++ devices?
Is the LSZH jacket suitable for UK public buildings?
Are the connectors snagless and shielded?
What is the cable length?
Is it worth it?
Buy this cable for short, high-density runs needing 10GbE and PoE++. It suits UK data centres, offices, and public buildings requiring LSZH safety. It is not a long patch lead. Covered by the applicable manufacturer warranty.

Reviews
Clear filtersThere are no reviews yet.