connektgear 28-0050GN Cat5e U/UTP Network Cable Green 5m

Connektgear 28-0050GN | 5m Green Cat5e UTP Patch Lead

The connektgear 28-0050GN networking cable Green 5 m Cat5e U/UTP (UTP) is a standard RJ-45 patch lead for UK home and office networks. It connects PCs, printers, or switches to a patch panel or wall port. The 5-metre length suits medium-distance runs between desks and cabinets. Its green PVC jacket helps with cable identification in dense racks.

This cable uses Cat5e U/UTP (unshielded twisted pair) for 10/100/1000Base-T(X) networks. The conductors are stranded for flexibility. Gold-plated contacts provide reliable connectivity. The snagless and molded boots protect the RJ-45 clip during installation.

Key Specifications

Performance for 10/100/1000Base-T Networks

This cable supports Gigabit Ethernet (1000Base-T) over short distances. The U/UTP design is suitable for typical office runs without heavy EMI. However, verify the total run length does not exceed 100 metres from the switch to the device. In practice, use this 5 m lead for patching rather than permanent building cabling.

The 24 AWG conductors are standard for Cat5e patch leads. Because the conductors are stranded, the cable flexes easily around desks and equipment. This reduces strain on the RJ-45 connectors over time.

Connector and Boot Design

Both connectors are RJ-45 male with gold-plated contacts. The snagless and molded boots help prevent the clip from catching on cable ties. This protects the latch during frequent plugging and unplugging. However, the input does not specify the exact boot dimensions. If your patch panel has tight spacing, confirm clearance before purchase.

Cable Construction and Materials

The jacket is PVC, which is common for indoor patch leads in the UK. The cable colour is green for visual identification in mixed bundles. The connektgear 28-0050GN networking cable Green 5 m Cat5e U/UTP (UTP) uses stranded conductors for flexibility rather than solid-core rigidity. This makes it ideal for patch cords rather than fixed installation through walls.

Compliance and Safety

The product lists RoHS compliance. It does not specify UKCA or CE marking. If you require UKCA for your installation, confirm this with the distributor before ordering. The RoHS certificate confirms restriction of hazardous substances in the materials.

Box contents

• 1 x Connektgear 28-0050GN 5 m Cat5e U/UTP patch cable (green)

Check before you buy

• Confirm your patch panel or wall port accepts RJ-45 connectors.
• Verify the total network run length stays within 100 metres.
• Check that green colour coding fits your cable management scheme.
• Confirm UKCA/CE requirements if applicable to your site.

Frequently Asked Questions

Q: Is this cable suitable for Gigabit Ethernet?

A: Yes, it supports 10/100/1000Base-T(X) networks up to 100 metres.

Q: Is the cable shielded?

A: No, it is U/UTP (unshielded twisted pair).

Q: Are the connectors gold-plated?

A: Yes, the RJ-45 contacts are gold-plated.

Q: Is this cable UL listed?

A: The input does not specify UL listing. Confirm with the distributor if required.

Q: Can I use this for PoE devices?

A: Cat5e UTP can support PoE, but verify your device’s power standard and cable length.

Q: Is the cable RoHS compliant?

A: Yes, RoHS compliance is listed.

The Consultant’s verdict & warranty

This cable is best for UK office or home users who need a standard 5 m green patch lead for 10/100/1000Base-T networks. It suits patching between a PC, switch, or patch panel. The snagless boots and stranded conductors make it practical for daily use.

Covered by the standard Manufacturer Warranty.