StarTech.com 7m CAT6a LSZH S/FTP Ethernet Cable – 10GbE 500MHz PoE++ RJ-45

StarTech.com 7m CAT6a Ethernet Cable | LSZH 10GbE Shielded

The StarTech.com 7m CAT6a Ethernet Cable – Black – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord is built for high-density UK networks. It delivers 10 Gigabit speeds and 100W power over a single cable. This makes it ideal for modern offices and AV setups. The LSZH jacket adds safety for indoor runs.

Slim Specs Table

10GbE Performance for Demanding UK Networks

This cable supports 10GBase-T. It handles Multi-Gigabit speeds of 1/2.5/5Gbps. The 500MHz bandwidth manages heavy data loads. S/FTP shielding blocks EMI and RFI. So, your signal stays stable over the full 7 metres. This is vital for noisy environments.

Enhanced Fire Safety with LSZH Jacket

The Low Smoke Zero Halogen jacket is safer than standard PVC. It produces minimal toxic fumes if exposed to fire. This improves visibility during evacuation. It is a smart choice for offices and public buildings. Confirm compliance with your local fire safety codes.

Reliable 100W PoE++ Power Delivery

This cable meets IEEE 802.3bt-2018 standards. It supports PoE++ Type 4. This delivers up to 100W to powered devices. You can run high-power gear like PTZ cameras or APs. It simplifies your cabling infrastructure. No separate power leads are needed.

Snagless Connectors with Strain Relief

The snagless boots protect the RJ-45 latches. They prevent clips from catching during installation. Integrated strain relief stops sharp bends at the connector. This reduces damage risk. It ensures a long service life for the patch cord.

Certified for High-Speed Reliability

The cable is ETL Verified. It meets ANSI/TIA-568.2-D standards. Independent testing confirms low insertion loss. It also checks crosstalk limits. This maintains signal integrity. It is built for reliable 10G applications.

Box contents

• 1 x StarTech.com 7m CAT6a Ethernet Cable – Black – Low Smoke Zero Halogen (LSZH) – 10GbE 500MHz 100W PoE++ Snagless RJ-45 w/Strain Reliefs S/FTP Network Patch Cord

Check before you buy

• Confirm your switch or router supports 10GBase-T ports for full speed.
• Verify the PoE source supports IEEE 802.3bt (PoE++) for 100W delivery.
• Ensure the 7m length fits your rack or device layout without tension.
• Check if your environment requires specific UKCA marking beyond CE.

Frequently Asked Questions

Q: Is this cable suitable for outdoor use?

A: No, the LSZH jacket is designed for indoor use. It is not UV-resistant or waterproof.

Q: Does this cable work with my Gigabit router?

A: Yes, it is backward compatible with 10/100/1000BASE-T networks.

Q: Can I use this for a PoE security camera?

A: Yes, it supports PoE++ up to 100W. Check your camera’s power requirement.

Q: What does S/FTP shielding mean?

A: It means each pair is shielded and the cable has an overall braid shield. This reduces interference.

Q: Is the connector standard RJ-45?

A: Yes, it uses standard RJ-45 male connectors. They fit all Ethernet ports.

The Consultant’s verdict & warranty

Buy this cable if you need a safe, high-speed 10G link for indoor UK networks. It is ideal for offices, studios, and servers requiring PoE++ power. The LSZH jacket adds critical fire safety. The snagless design eases installation. Covered by the standard Manufacturer Warranty.