StarTech.com 7m Grey Slim CAT6 Ethernet Cable, 100W PoE, UTP, 28AWG

StarTech.com 7m Gray Slim CAT6 Ethernet Cable | Slim LSZH PoE++ Patch Cord

The StarTech.com 7m Gray Slim CAT6 Ethernet Cable, Snagless, 100W PoE, UTP, LSZH, 28AWG Pure Bare Copper Wire, Slim RJ45 Network Patch Cord w/Strain Reliefs, Individually Tested delivers reliable Gigabit connectivity. It is designed for UK network engineers and IT installers working in high-density racks. This cable offers a slim profile for better airflow and supports PoE++ devices.

Slim Cable for Better Airflow

This Slim Cat6 patch cord is 36% thinner than standard Ethernet cables. The reduced diameter improves airflow in crowded racks. It also allows easier routing through narrow patch panels. The flexible LSZH jacket simplifies installation in tight spaces.

Pure Copper Performance

The cable uses 28AWG pure bare copper conductors. This ensures low resistance and stable signal quality. Gold-plated RJ45 contacts provide a precise fit. The snagless boots protect clips during deployment.

High-Power PoE Support

It supports IEEE 802.3bt PoE++ standards. You can deliver up to 100W to connected devices. This is ideal for powering switches or cameras. The UTP construction maintains performance without shielding bulk.

Tested to Category 6 Standards

Each cable is Fluke® tested to ANSI/TIA-568.2-D. This verifies low near-end crosstalk and return loss. You get consistent Gigabit speeds up to 1000 Mbit/s. The 250 MHz frequency rating meets Cat6 specifications.

Durable LSZH Jacket

The Low Smoke Zero Halogen jacket adds safety. It emits minimal smoke and fumes if exposed to heat. This suits industrial or transport environments. The outer diameter is compact at 3.6 mm.

Slim Specs Table

Box contents

• 1 x StarTech.com 7m Gray Slim CAT6 Ethernet Cable, Snagless, 100W PoE, UTP, LSZH, 28AWG Pure Bare Copper Wire, Slim RJ45 Network Patch Cord w/Strain Reliefs, Individually Tested

Check before you buy

• Confirm your switch or device supports PoE++ (IEEE 802.3bt Type 4) for 100W delivery.
• Verify the RJ-45 port spacing in your rack suits the slim 3.6 mm cable diameter.
• Check local building codes for LSZH cable requirements in your installation area.
• Ensure the 7 m length is sufficient for your patch panel to device distance.

Frequently Asked Questions

Q: Is this cable compatible with standard Gigabit Ethernet ports?

A: Yes, it works with 10/100/1000Base-T(X) RJ-45 ports.

Q: Can I use it for PoE cameras and switches?

A: Yes, it supports up to 100W PoE++ per IEEE 802.3bt.

Q: Is the LSZH jacket suitable for UK building regulations?

A: LSZH is often required in enclosed public spaces; confirm local compliance.

Q: Does the slim design affect signal quality?

A: No, it is Fluke-tested to ANSI/TIA-568.2-D Cat6 specs.

Q: Are the connectors snagless?

A: Yes, the boots protect RJ45 clips during installation.

The Consultant’s verdict & warranty

This cable is ideal for UK IT professionals managing dense racks or PoE++ devices. It offers reliable Gigabit performance, improved airflow, and LSZH safety. Covered by the standard Manufacturer Warranty.