Allied Telesis AT-DMC100/ST-30 Media Converter, 100Base-TX to 100Base-FX, 100 Mbps, ST Multi-mode Fibre, 2 km, Grey
Original price was: £145.19.£136.42Current price is: £136.42.
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Data transfer rate: 100 Mbit/s
- Media conversion: 100Base-TX to 100Base-FX
- Fibre connection: ST multi-mode, up to 2 km
- Networking standard: IEEE 802.1Q with VLAN support
- Duplex support: full and half duplex
- Dimensions: 31.8 × 91.4 × 21.6 mm
You may also like
Digitus CAT 6A Shielded Keystone Module Set 24pc, RJ-45 to LSA, Tool-Free, Silver
In stock
Allied Telesis AT-DMC100/ST-30 – extend Fast Ethernet over fibre
We recommend the Allied Telesis AT-DMC100/ST-30 for connecting 100Base-TX equipment to a multimode fibre link. Its 100Base-FX output supports fibre runs up to 2 km, helping bridge distances beyond a copper Ethernet connection.
The connection essentials
| Metric | Specification |
|---|---|
| Copper input | 100Base-TX |
| Fibre output | 100Base-FX |
| Maximum data rate | 100 Mbit/s |
| Fibre connector | ST |
| Fibre type and distance | Multi-mode, up to 2 km |
| Wavelength | 1310 nm |
Match your existing fibre run
The ST connector and multimode fibre design suit networks already using this connection type. It supports 50/125 µm and 62.5/125 µm core/cladding fibre, so check your cable before ordering.
Auto MDI/MDI-X simplifies the copper-side connection, while support for full and half duplex accommodates either mode. The converter also supports VLANs and IEEE 802.1Q.
Check the fit and operating conditions
At 31.8 mm wide, 91.4 mm deep and 21.6 mm high, the unit has a compact footprint. It weighs 113 g and has a typical power consumption of 1.5 W.
It operates between 0 and 40°C, with a stated operating humidity range of 5–95%. These limits help you assess whether its intended location suits the unit.
Before you order
- Confirm your copper equipment uses a 100Base-TX connection.
- Check that your fibre link uses multimode cable with an ST connector.
- Confirm your fibre cable supports 50/125 µm or 62.5/125 µm core/cladding.
- Check that the required fibre distance is no more than 2 km.
Frequently Asked Questions
Q: What does this media converter connect?
A: It converts a 100Base-TX input to a 100Base-FX fibre output.
Q: What fibre connection does it use?
A: It uses an ST connector with multimode fibre at a 1310 nm wavelength.
Q: What is the maximum fibre distance?
A: The supported maximum transfer distance is 2 km.
Q: Does it support VLANs?
A: Yes. It supports VLANs and the IEEE 802.1Q networking standard.
A practical choice for multimode links
Choose the Allied Telesis AT-DMC100/ST-30 when you need to connect Fast Ethernet copper equipment to a compatible multimode ST fibre link. Its 2 km reach and support for two common fibre core sizes make it a useful fit for extending an existing network.
| Network | |
|---|---|
| Fibre optic connector | ST |
| Data transfer rate | 100 Mbit/s |
| Packet forwarding rate (100 Mbps) | 148800 pps |
| Packet forwarding rate (10 Mbps) | 14880 pps |
| Packet forwarding rate (1 Gbps) | 1488000 pps |
| VLAN support | Yes |
| Converter input interface | 100Base-TX |
| Networking standards | IEEE 802.1Q |
| Ethernet interface type | Fast Ethernet |
| Duplex system | Full, Half |
| Converter output interface | 100Base-FX |
| Auto MDI/MDI-X | Yes |
| Maximum data transfer rate | 100 Mbit/s |
| Technical details | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 2000 m |
| Fibre mode structure | Multi-mode |
| Fibre cable diameters supported (core/cladding) | 50/125,62.5/125 µm |
| Tx power (min) | -22.5 dBmW |
| Tx power (max) | -14 dBmW |
| Rx power (min) | -32 dBmW |
| Internal | Yes |
| Data transfer rate | 100 Mbit/s |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Fibre optic connector | ST |
| Indication | |
| LED indicators | Yes |
| Performance | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 2000 m |
| Fibre mode structure | Multi-mode |
| Fibre cable diameters supported (core/cladding) | 50/125,62.5/125 µm |
| Tx power (min) | -22.5 dBmW |
| Tx power (max) | -14 dBmW |
| Rx power (min) | -32 dBmW |
| Design | |
| LED indicators | Yes |
| Product colour | Grey |
| Internal | Yes |
| Power | |
| Power consumption (typical) | 1.5 W |
| Colour | |
| Product colour | Grey |
| Weight & dimensions | |
| Width | 31.8 mm |
| Depth | 91.4 mm |
| Weight | 113 g |
| Height | 21.6 mm |
| Operational conditions | |
| Operating temperature | 0 - 40 °C |
| Storage temperature | -15 - 65 °C |
| Operating relative humidity | 5 - 95% |
| Storage relative humidity | 5 - 95% |
| Operating altitude | 0 - 3048 m |
Reviews
Clear filtersThere are no reviews yet.