Allied Telesis AT-MMC2000/LC-960 Gigabit Ethernet Media Converter, 10/100/1000BASE-T to 1000BASE-SX, Multi-mode LC, PoE, Grey
£169.45
Out of stock
Out of stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 10/100/1000BASE-T to 1000BASE-SX conversion
- IEEE 802.1Q VLAN and jumbo-frame support
- Multi-mode fibre connectivity with LC connector
- One RJ-45 Ethernet port and two fibre ports
- PoE support with 1.7 W typical consumption
- Compact grey unit measuring 54.9 × 101.6 × 21.8 mm
You may also like
Digitus CAT 6A Keystone Module, Shielded, Tool-Free, PoE, Silver
In stock
Ubiquiti CKG2-RM Rack Front Panel
In stock
Allied Telesis AT-MMC2000/LC-960 – compact copper-to-fibre conversion
The Allied Telesis AT-MMC2000/LC-960 suits network teams connecting Gigabit Ethernet equipment over multimode fibre. It converts 10/100/1000BASE-T copper Ethernet to 1000BASE-SX fibre, giving you a practical way to link different network media.
Essential connection details
| Metric | Specification |
|---|---|
| Copper input | 10BASE-T, 100BASE-T and 1000BASE-T |
| Fibre output | 1000BASE-SX |
| Maximum data rate | 1000 Mbit/s |
| Fibre connection | LC |
| Fibre type | Multimode, 50/125 or 62.5/125 µm |
| Network support | IEEE 802.1Q VLANs and jumbo frames |
Bridge copper Ethernet to multimode fibre
Connect a copper Ethernet device through the RJ-45 port, then use the LC fibre connection for the fibre link. The converter supports 10, 100 and 1000 Mbit/s copper rates, with full-duplex operation. This makes it useful when your network endpoint and fibre infrastructure use different media.
Keep modern network traffic moving
IEEE 802.1Q VLAN support and jumbo-frame handling help the converter work with common network traffic requirements. So it can fit into networks that use VLAN tagging or larger packets, rather than limiting you to standard-sized frames.
The unit also has link and activity indicators. These provide a quick visual check of connection status during setup or troubleshooting. PoE support is included.
Small footprint and modest power use
At 54.9 × 101.6 × 21.8 mm and 170 g, this grey converter can fit into space-conscious installations. It uses 1.7 W typically and connects to a 12 V DC input.
Check your network fit
- Confirm your copper device uses 10BASE-T, 100BASE-T or 1000BASE-T Ethernet.
- Check that your fibre link uses multimode cable with an LC connector.
- Confirm the fibre cores are 50/125 or 62.5/125 µm.
- Check that your installation provides a 12 V DC connection.
Frequently Asked Questions
Q: What copper Ethernet rates does it support?
A: It supports 10, 100 and 1000 Mbit/s Ethernet over 10BASE-T, 100BASE-T and 1000BASE-T.
Q: Which fibre connection does it use?
A: It provides a 1000BASE-SX fibre connection with an LC connector for multimode fibre.
Q: Does it support VLANs and jumbo frames?
A: Yes. It supports IEEE 802.1Q VLANs and jumbo frames.
Q: What power input does it require?
A: It has a DC input jack and uses 12 V input voltage.
A practical choice for mixed-media networks
Choose the Allied Telesis AT-MMC2000/LC-960 when you need to connect Gigabit copper Ethernet to multimode 1000BASE-SX fibre. Its VLAN and jumbo-frame support also makes it suitable for network environments using those features.
| Network | |
|---|---|
| Fibre optic connector | LC |
| Jumbo frames support | Yes |
| VLAN support | Yes |
| Fibre ethernet cabling technology | 1000BASE‑SX |
| Converter input interface | 10Base-T, 100Base-T, 1000Base-T |
| Networking standards | IEEE 802.1Q |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Duplex system | Full |
| Converter output interface | 1000Base-SX |
| Maximum data transfer rate | 1000 Mbit/s |
| Technical details | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 2000 m |
| Fibre mode structure | Multi-mode |
| Fibre cable diameters supported (core/cladding) | 50/125,62.5/125 µm |
| Tx power (min) | -20 dBmW |
| Tx power (max) | -14 dBmW |
| Rx power (min) | -32 dBmW |
| Internal | No |
| Harmonized System (HS) code | 85176990 |
| Performance | |
| Jumbo frames support | Yes |
| Wavelength | 1310 nm |
| Maximum transfer distance | 2000 m |
| Fibre mode structure | Multi-mode |
| Fibre cable diameters supported (core/cladding) | 50/125,62.5/125 µm |
| Tx power (min) | -20 dBmW |
| Tx power (max) | -14 dBmW |
| Rx power (min) | -32 dBmW |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fibre ports quantity | 2 |
| Fibre optic connector | LC |
| DC-in jack | Yes |
| Indication | |
| LED indicators | Activity, Link |
| Design | |
| Safety | FCC Class A, EN55022 Class A, CISPR 22 Class A, C-TICK, VCCI |
| LED indicators | Activity, Link |
| Product colour | Grey |
| Certification | CE, EN55024, EN61000-3-2, EN61000-3-3 |
| Internal | No |
| Power | |
| Power over Ethernet (PoE) | Yes |
| Input voltage | 12 V |
| Input current | 0.14 A |
| Power consumption (typical) | 1.7 W |
| Colour | |
| Product colour | Grey |
| Weight & dimensions | |
| Width | 54.9 mm |
| Depth | 101.6 mm |
| Weight | 170 g |
| Height | 21.8 mm |
| Operational conditions | |
| Operating temperature | 0 - 50 °C |
| Storage temperature | -30 - 70 °C |
| Operating relative humidity | 5 - 95% |
| Storage relative humidity | 5 - 95% |
| Operating altitude | 0 - 3048 m |
| Packaging content | |
| Quick installation guide | Yes |
| User guide | Yes |
| Manual | Yes |
| Certificates | |
| Safety | FCC Class A, EN55022 Class A, CISPR 22 Class A, C-TICK, VCCI |
| Certification | CE, EN55024, EN61000-3-2, EN61000-3-3 |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
Reviews
Clear filtersThere are no reviews yet.