Allied Telesis AT-MMC2000LX/LC-TAA-60 Gigabit Media Converter, 1000BASE-LX, 1310 nm, LC, Single-Mode, 10 km, Grey
Original price was: £326.39.£309.22Current price is: £309.22.
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1000BASE-LX fibre links up to 10 km
- 1310 nm single-mode fibre with LC connectors
- Copper input supports 10/100/1000BASE-T Ethernet
- IEEE 802.1Q VLAN and jumbo-frame support
- Gigabit Ethernet conversion with full-duplex operation
- Compact converter measures 56 × 101.6 × 21.8 mm
You may also like
BTI Projector Lamp, 170W UHE, 4,000-Hour Life, for Epson Powerlite S5, S6, W6, 77C, 78, EX30, EX50 and EX70
In stock
BTI Replacement Projector Lamp for NEC MC342X, 225 W P-VIP
In stock
BTI 240W USB-C AC Adapter for Laptops, with UK Power Cable, Black
In stock
Fellowes Stellar A4 Paper Guillotine, 32 cm Cutting Length, 20-Sheet Capacity, Graphite/Yellow
In stock
Logitech MX Master 3S for Business Wireless Mouse, 8000 DPI, Bluetooth, Graphite
In stock
Allied Telesis AT-MMC2000LX/LC-TAA-60 – Extend Gigabit over single-mode fibre
We recommend the Allied Telesis AT-MMC2000LX/LC-TAA-60 for networks that need a copper-to-fibre connection over longer distances. It converts a copper Ethernet link to 1000BASE-LX fibre, with a maximum reach of 10 km over single-mode fibre.
Key connection details
| Metric | Specification |
|---|---|
| Copper interface | 1 RJ-45 port, 10/100/1000Base-T |
| Fibre standard | 1000BASE-LX |
| Fibre connector | LC |
| Fibre mode and wavelength | Single-mode, 1310 nm |
| Maximum fibre distance | 10 km |
| VLAN and jumbo frame support | IEEE 802.1Q; jumbo frames supported |
Extend a copper network over fibre
Use the RJ-45 port to connect a copper Ethernet device, then link the converter to compatible 1000BASE-LX fibre equipment. This makes it suitable for network links where copper cabling cannot cover the required distance. The copper connection supports 10, 100 and 1000 Mbit/s Ethernet.
The fibre link uses single-mode cabling and LC connectors. Check that the equipment at the other end also supports 1000BASE-LX at 1310 nm.
Keep VLAN traffic moving
IEEE 802.1Q support allows the converter to pass VLAN traffic. It also supports jumbo frames, helping it work with networks that use larger Ethernet packets. Full-duplex operation supports simultaneous sending and receiving across the link.
Compact for flexible placement
The grey unit measures 56 mm wide, 101.6 mm deep and 21.8 mm high. Its compact, external-powered design gives you more placement options than a larger converter. It takes a 12 V input and operates at temperatures from 0°C to 50°C.
Smart MissingLink monitors network connections and helps identify failed segments. Smart Link Restoration can restore a link after an interruption without a manual restart. Link Test helps narrow down whether a connection issue involves a port, cable or connected end node.
Check your network before ordering
- Confirm your copper device uses an RJ-45 Ethernet connection.
- Check that your fibre cabling is single-mode with LC connectors.
- Confirm the equipment at the far end supports 1000BASE-LX at 1310 nm.
- Check that your fibre run is no longer than 10 km.
Frequently Asked Questions
Q: What fibre standard does this converter use?
A: It uses 1000BASE-LX over single-mode fibre at a wavelength of 1310 nm.
Q: What is the maximum fibre distance?
A: The maximum transfer distance is 10 km over single-mode fibre.
Q: Does it support VLANs and jumbo frames?
A: Yes. It supports IEEE 802.1Q VLANs and jumbo frames.
Q: What copper Ethernet speeds does it accept?
A: Its RJ-45 port supports 10, 100 and 1000 Mbit/s Ethernet.
A practical choice for long fibre links
Choose the Allied Telesis AT-MMC2000LX/LC-TAA-60 when you need to connect copper Ethernet to a compatible 1000BASE-LX single-mode fibre link. Its 10 km reach, VLAN support and compact size suit network extensions where distance and placement matter.
| Network | |
|---|---|
| Jumbo frames support | Yes |
| VLAN support | Yes |
| Fibre ethernet cabling technology | 1000BASE‑LX |
| Converter input interface | 10Base-T, 100Base-T, 1000Base-T |
| Networking standards | IEEE 802.1Q |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Duplex system | Full |
| Converter output interface | 1000Base-LX |
| Maximum data transfer rate | 1000 Mbit/s |
| Fibre optic connector | LC |
| Performance | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 10000 m |
| Fibre mode structure | Single-mode |
| Jumbo frames support | Yes |
| Features | |
| Product colour | Grey |
| Internal | No |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fibre ports quantity | 2 |
| Fibre optic connector | LC |
| Power | |
| Input voltage | 12 V |
| Input current | 0.14 A |
| Weight & dimensions | |
| Width | 56 mm |
| Depth | 101.6 mm |
| Weight | 170 g |
| Height | 21.8 mm |
| Operational conditions | |
| Operating temperature | 0 - 50 °C |
| Storage temperature | -30 - 70 °C |
| Operating relative humidity | 5 - 95% |
| Storage relative humidity | 5 - 95% |
| Operating altitude | 0 - 3048 m |
| Technical details | |
| Wavelength | 1310 nm |
| Maximum transfer distance | 10000 m |
| Fibre mode structure | Single-mode |
| Internal | No |
| Harmonized System (HS) code | 85176990 |
| Design | |
| Product colour | Grey |
| Certification | UL60950-1 EN60950-1 FCC Class A EN55022 Class A CISPR 22 Class A C-TICK VCCI |
| Internal | No |
| Colour | |
| Product colour | Grey |
| Certificates | |
| Certification | UL60950-1 EN60950-1 FCC Class A EN55022 Class A CISPR 22 Class A C-TICK VCCI |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Identifiers | |
| Additional EANs | 0767035216409 |
Reviews
Clear filtersThere are no reviews yet.