Allied Telesis AT-SPTX-90 Copper SFP Transceiver, Gigabit Ethernet, 1000 Mbit/s, 100 m

Allied Telesis AT-SPTX-90 – Gigabit Ethernet over copper

The Allied Telesis AT-SPTX-90 suits network upgrades that need a copper connection through an SFP interface. It provides Gigabit Ethernet over RJ-45, with a maximum link distance of 100 metres.

Essential connection details

Use your existing copper network

This transceiver connects through an RJ-45 port, so it supports copper Ethernet cabling rather than a fibre connection. Its 100-metre maximum distance suits many standard network runs. Keep the connection within that limit for the stated reach.

Fit and replace with ease

The module supports plug-and-play installation, hot-plugging and hot-swapping. So, you can fit or replace it in compatible equipment without treating it as a fixed component. Its metal housing provides a durable enclosure.

The module is compatible with Allied Telesis equipment and uses an SFP interface. It operates from 0°C to 70°C, making it suitable for environments within that temperature range.

Check your setup first

• Confirm your network equipment supports Allied Telesis copper SFP transceivers.
• Check that your equipment has an available SFP interface.
• Confirm your network connection uses an RJ-45 copper cable.
• Check that the cable run is no longer than 100 metres.

Frequently Asked Questions

Q: What connection does this transceiver use?

A: It uses an RJ-45 connector for a copper Ethernet connection.

Q: What is its maximum data rate?

A: It supports a maximum data transfer rate of 1000 Mbit/s.

Q: Can I hot-swap the module?

A: Yes. It supports hot-plugging and hot-swapping.

A practical choice for copper SFP links

Choose the Allied Telesis AT-SPTX-90 when you need a compatible SFP module for Gigabit Ethernet over copper. Its RJ-45 connection and 100-metre maximum reach make it a straightforward fit for supported network equipment.