APC BV1000I Line-Interactive UPS, 1 kVA / 600 W, 230 V, 1 C13 Outlet, Sine Wave UPS

SKU: BV1000I

Original price was: £121.19.Current price is: £113.34.

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order now, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 1 kVA capacity with 600 W output
  • Line-interactive topology with sine-wave output
  • 230 V output with one C13 outlet
  • Automatic voltage regulation for 170–280 V input
  • 156 J surge protection with audible alarms
  • Compact dimensions: 160 × 305 × 92 mm
Description

APC BV1000I – Backup power for essential equipment

The APC BV1000I suits home offices and small setups that need backup power for one important device. Its line-interactive design combines battery backup with automatic voltage regulation, helping protect connected equipment from mains fluctuations and outages.

Key specifications at a glance

Metric Specification
Power capacity 1 kVA / 600 W
Output voltage 230 V
UPS topology Line-interactive
Waveform Sine wave
AC outlet 1 × C13
Mains operating range 170–280 V

AVR helps manage voltage changes

Automatic Voltage Regulation (AVR) steps voltage up or down to keep it within a suitable range for your equipment. It can correct low voltage without switching to battery, helping preserve battery charge for an outage. Surge protection adds another layer of protection against spikes.

Battery backup for one connected device

The single C13 outlet provides battery backup and surge protection. So, check that your equipment’s power lead matches this outlet and that its power demand stays within the 600 W limit.

When mains power fails, the UPS transfers to battery mode in 6 ms. Audible alarms indicate low battery and overload conditions, while the 156 J surge rating gives a clear measure of its surge protection capacity.

Fit and placement

The unit measures 160 × 305 × 92 mm and weighs 5.7 kg. Its 1.52 m cable gives you some flexibility when positioning it near your equipment. It operates at 0–40 °C and has a noise level of 40 dB.

Before you order

  • Confirm your device uses a power lead compatible with the C13 outlet.
  • Check the total connected load does not exceed 600 W.
  • Confirm your equipment is suitable for a 230 V supply.
  • Check you have space for the 160 × 305 × 92 mm unit and its cable.

Frequently Asked Questions

Q: How much power can this UPS support?

A: It has a capacity of 1 kVA and supports output loads up to 600 W.

Q: How many AC outlets does it have?

A: It has one C13 AC outlet with battery backup and surge protection.

Q: Does it regulate voltage automatically?

A: Yes. AVR steps voltage up or down, helping manage mains fluctuations without using battery power for every correction.

Q: What does the UPS alert me to?

A: Audible alarms indicate low battery and overload conditions.

A practical choice for single-device backup

Choose the APC BV1000I if you need sine wave backup, AVR and surge protection for one compatible device. Its 600 W limit and single C13 outlet make it important to check your equipment before ordering.

Specifications
Power
Output voltage regulation10%
Output frequency regulation50/60 Hz
Output power600 W
Input operation voltage (min)170 V
Input operation voltage (max)280 V
Output operation voltage (min)0 V
Output operation voltage (max)0 V
Surge energy rating156 J
Output power capacity1 kVA
Ports & interfaces
Cable length1.52 m
SmartSlotNo
AC outlets quantity1 AC outlets
AC outlet typesC13 coupler
SmartConnect portNo
Battery
Battery typeleakproof
Battery life (max)5 years
Battery capacity9 VAh
Battery recharge time8 h
Performance
Audible alarm modesLow battery alarm, Overload alarm
UPS topologyLine-Interactive
WaveformSine
Automatic Voltage Regulation (AVR)Yes
Surge protectionYes
Noise level40 dB
Audible alarmsYes
Transfer time (Line Mode to Battery Mode)6 ms
Features
Output frequency50/60 Hz
Audible alarm modesLow battery alarm, Overload alarm
UPS topologyLine-Interactive
WaveformSine
Output voltage regulation10%
Output frequency regulation50/60 Hz
Automatic Voltage Regulation (AVR)Yes
Output power600 W
Input operation voltage (min)170 V
Input operation voltage (max)280 V
Output operation voltage (min)0 V
Output operation voltage (max)0 V
Surge energy rating156 J
Surge protectionYes
Noise level40 dB
Audible alarmsYes
Output power capacity1 kVA
Transfer time (Line Mode to Battery Mode)6 ms
Input frequency50/60 Hz
Design
Product colourBlack
CertificationCE
Cable length1.52 m
Operational conditions
Operating temperature0 - 40 °C
Operating relative humidity0 - 90%
Technical details
Output voltage230 V
Output frequency50/60 Hz
Harmonized System (HS) code85078000
Compliance certificatesRoHS
Certificates
CertificationCE
Compliance certificatesRoHS
Packaging content
ManualYes
Management card includedNo
Weight & dimensions
Package width143 mm
Package depth373 mm
Package height237 mm
Weight5.7 kg
Width160 mm
Package weight6 kg
Height92 mm
Depth305 mm
Packaging data
ManualYes
Package width143 mm
Package depth373 mm
Package height237 mm
Package weight6 kg
Management card includedNo
Logistics data
Harmonized System (HS) code85078000
Other features
Output voltage230 V
Battery typeleakproof
Identifiers
Additional EANs10731304338229

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.