APC Smart-UPS SMT750RMI2UNC 750VA Line-Interactive UPS, 500W, 2U Rackmount, 4 x C13, Network Management Card

APC Smart-UPS SMT750RMI2UNC – rack power protection with remote management

We recommend the APC Smart-UPS SMT750RMI2UNC for IT teams and network administrators protecting essential equipment. Its line-interactive design supplies battery power during an outage, while the included network management card enables remote monitoring.

Essential specifications at a glance

Protect critical equipment during outages

The 500W capacity supports connected equipment through power disruptions. Its pure sine wave output suits sensitive IT hardware, while surge protection helps guard against voltage spikes.

The UPS can also start on battery power and restart automatically when power returns. Its LCD and LED indicators make local status checks straightforward.

Manage power remotely

A network management card is included for network-based monitoring and management. The UPS also has a USB 2.0 port and an Ethernet RJ-45 port.

Use compatible PowerChute Network Shutdown software to coordinate controlled shutdowns for physical servers and virtual machines. This helps reduce the risk of data loss during an extended outage.

Fit it into a standard rack

The 2U rackmount chassis measures 432mm wide, 406mm deep and 89mm high. A rack mount kit is included, helping you install it in a compatible rack.

The four C13 outlets connect to equipment with matching IEC power leads. The UPS uses a C14 mains connection, so check that your power cable and rack setup suit this connection.

Replace the battery without powering down

The sealed lead-acid battery is hot-swappable and user-replaceable. This lets you change the battery without switching off the UPS or connected equipment.

A full recharge takes around three hours. The UPS also runs automatic battery tests to help monitor battery condition.

Check your setup before ordering

• Confirm your equipment’s combined load is within the 500W output limit.
• Check that your devices use C13-compatible power connections.
• Confirm your rack has space for a 2U unit measuring 432mm wide and 406mm deep.
• Check that your power setup supports a C14 mains connection.

Frequently Asked Questions

Q: How many devices can connect directly?

A: The UPS has four IEC C13 outlets.

Q: Can I monitor the UPS over a network?

A: Yes. It includes a network management card for network-based monitoring and management.

Q: Can I replace the battery while the UPS is running?

A: Yes. Its hot-swappable battery can be replaced without switching off the UPS or connected equipment.

Q: What warranty does it include?

A: The UPS has a three-year warranty. The built-in battery has a two-year warranty.

A practical choice for managed IT systems

Choose the APC Smart-UPS SMT750RMI2UNC when you need 2U rackmount backup, sine wave output and network monitoring in one unit. Its 500W capacity and replaceable battery make it a considered fit for essential business equipment.