APC Smart-UPS On-Line 1000VA/1000W 2U Rackmount UPS, 6x C13 Outlets, Extended Runtime, Rail Kit

APC Smart-UPS SRT1000RMXLI – online protection in a 2U rack

We recommend the APC Smart-UPS SRT1000RMXLI for IT teams protecting servers and network equipment. Its double-conversion online design supplies sine-wave power to connected equipment during power disruptions.

Key specifications for rack planning

Keep critical equipment powered

Double-conversion technology continuously conditions the power supplied to connected devices. The pure sine-wave output suits sensitive electronics, while the 1000 W capacity gives you a clear limit for planning the connected load.

The six C13 outlets let you connect several devices directly. However, check that your equipment’s power leads have compatible plugs and that their combined demand stays within the UPS capacity.

Manage and maintain the UPS

A hot-swappable battery supports replacement without taking the UPS out of service for the change. The battery can recharge in three hours, and its stated maximum life is five years.

For monitoring, the unit provides USB 2.0, an RJ-45 serial interface and a SmartSlot for an optional network management card. The card is not included. An Emergency Power Off connection is also available for compatible shutdown arrangements.

Fit it into your setup

This UPS measures 432 × 505 × 85 mm and weighs 21 kg. It can be used in a rack or tower configuration. Status LEDs and audible alarms help you notice operating changes, with a stated noise level of 50 dB.

The unit has a three-year UPS warranty and a two-year warranty for its built-in battery.

Included for rack installation

• Rail kit

Check your requirements before ordering

• Confirm your rack has space for a 2U unit measuring 432 × 505 × 85 mm.
• Check that your equipment’s combined power demand is within the 1000 W limit.
• Confirm your devices connect to C13 outlets using compatible power leads.
• Check whether your monitoring setup needs an optional network management card.

Frequently Asked Questions

Q: How many devices can I connect?

A: The UPS has six C13 outlets, with a total output capacity of 1000 W.

Q: Can I use it as a tower?

A: Yes. It supports both rackmount and tower configurations.

Q: Is a network management card included?

A: No. The SmartSlot supports an optional network management card, which is not included.

Q: Can the battery be replaced while the UPS remains in service?

A: Yes. The sealed lead-acid battery is hot-swappable.

A practical choice for critical systems

Choose the APC Smart-UPS SRT1000RMXLI when you need online power protection, sine-wave output and rack or tower flexibility. Its six outlets, hot-swappable battery and management options make it suited to business IT equipment.