APC Smart-UPS X SMX3000HV Line-Interactive UPS, 3000VA/2700W, 8x C13 + 2x C19, 4U Rack/Tower
£2,341.10
In stock
In stock
- Free Premium delivery on UK mainland orders
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 3kVA/2700W line-interactive UPS with sine-wave output
- 10 outlets: eight C13 and two C19
- 4U rackmount/tower convertible design
- AVR supports a 140–280V input range
- Typical runtime of 18 minutes at half load
- SmartSlot, USB and RS-232 interfaces
- British BS1363A input power cord included
You may also like
APC Smart-UPS X SMX3000HV – reliable power for critical equipment
The APC Smart-UPS X SMX3000HV suits IT teams protecting servers, switches and other business equipment. Its 3kVA line-interactive design supplies pure sine wave power during interruptions and helps manage voltage fluctuations.
Core specifications at a glance
| Metric | Specification |
|---|---|
| Power capacity | 3kVA / 2700W |
| Topology and waveform | Line-interactive, sine wave |
| AC outlets | 8 × C13 and 2 × C19 |
| Typical runtime | 18 minutes at half load; 6.25 minutes at full load |
| Form factor | 4U rackmount or tower |
| Battery | Sealed lead-acid, hot-swappable |
Maintain uptime through power disruptions
Automatic Voltage Regulation helps correct voltage fluctuations, while surge protection guards connected equipment against electrical spikes. If mains power fails, the battery provides backup power so you have time to keep essential systems running or shut them down safely.
Runtime depends on the connected load. The UPS typically runs for 18 minutes at half load and 6.25 minutes at full load. You can extend runtime with compatible SMX120BP external battery packs.
Choose rack or tower installation
The 4U chassis can be installed in a rack or used upright as a tower. Rack brackets and tower stabilising feet are included, giving you flexibility when planning your equipment layout.
Eight C13 and two C19 outlets support a range of IT equipment. Three switched outlet groups allow phased start-up, remote reboot and shutdown of non-critical loads when configured with suitable management tools.
Manage and replace the battery
The LCD shows UPS status, and audible alarms alert you to important events. A SmartSlot supports an optional network management card for remote monitoring and controlled shutdown workflows. A network management card is not included.
The sealed lead-acid battery is user-replaceable and hot-swappable. Automatic battery testing helps monitor battery condition without requiring a manual test routine.
Included with the UPS
- Rack-mount brackets and tower stabilising feet
- USB and RS-232 cables
- Two C13-to-C14 jumper cables
- British BS1363A-to-C19 power cord
- Installation guide, manual and software CD
Check your installation before ordering
- Confirm your equipment’s total power demand stays within 2700W.
- Check that your devices use C13 or C19 power connections.
- Confirm your rack has 4U of space, or plan a suitable upright location.
- Check whether you need an optional network management card for remote management.
Frequently Asked Questions
Q: Can this UPS be installed as a tower?
A: Yes. It supports rackmount or tower installation, and tower stabilising feet are included.
Q: How many devices can I connect?
A: It has eight C13 outlets and two C19 outlets. Check your equipment’s connectors and total power demand.
Q: Can I extend its runtime?
A: Yes. Compatible SMX120BP external battery packs can extend runtime.
Q: What warranty does it include?
A: The UPS has a three-year warranty. Its battery cartridge has a two-year warranty.
A strong fit for business-critical systems
We recommend the APC Smart-UPS X SMX3000HV for teams that need managed backup power, flexible installation and support for mixed C13 and C19 equipment. Its 2700W capacity, expandable runtime and hot-swappable battery make it a practical choice for protecting essential IT systems.
| Power | |
|---|---|
| Output frequency regulation | 50/60 Hz |
| Output power | 2700 W |
| Input operation voltage (min) | 140 V |
| Input operation voltage (max) | 280 V |
| Output operation voltage (min) | 208 V |
| Output operation voltage (max) | 240 V |
| Surge energy rating | 645 J |
| Efficiency | 98.5% |
| Emergency Power Off (EPO) | Yes |
| Crest factor | 3:1 |
| Output power capacity | 3 kVA |
| Ports & interfaces | |
| Cable length | 1.83 m |
| SmartSlot | Yes |
| AC outlets quantity | 10 AC outlets |
| AC outlet types | C13 coupler, C19 coupler |
| Power plug | C20 coupler |
| Number of output IEC jumpers | 2 |
| SmartConnect port | No |
| Performance | |
| Hold time (min) | 2 ms |
| Hold time (max) | 10 ms |
| UPS topology | Line-Interactive |
| Waveform | Sine |
| Auto-restart | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| LED indicators | Status |
| Surge protection | Yes |
| Noise level | 55 dB |
| Audible alarms | Yes |
| Features | |
| Hold time (min) | 2 ms |
| Hold time (max) | 10 ms |
| UPS topology | Line-Interactive |
| Waveform | Sine |
| Output frequency regulation | 50/60 Hz |
| Auto-restart | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| Output power | 2700 W |
| Input operation voltage (min) | 140 V |
| Input operation voltage (max) | 280 V |
| Output operation voltage (min) | 208 V |
| Output operation voltage (max) | 240 V |
| Surge energy rating | 645 J |
| Efficiency | 98.5% |
| Surge protection | Yes |
| Emergency Power Off (EPO) | Yes |
| Noise level | 55 dB |
| Crest factor | 3:1 |
| Audible alarms | Yes |
| Output power capacity | 3 kVA |
| Input frequency | 50/60 Hz |
| Battery | |
| Battery life (max) | 5 years |
| Battery capacity | 738 VAh |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 3 h |
| Typical backup time at half load | 18 min |
| Typical backup time at full load | 6.25 min |
| Hot-swap battery | Yes |
| Automatic battery test | Yes |
| Design | |
| Rack capacity | 4U |
| Form factor | Rackmount/Tower |
| LED indicators | Status |
| Product colour | Black, Stainless steel |
| Certification | C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE, REACH |
| Cable length | 1.83 m |
| Display type | LCD |
| Operational conditions | |
| Operating temperature | 0 - 40 °C |
| Storage temperature | -15 - 45 °C |
| Operating relative humidity | 0 - 95% |
| Storage relative humidity | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 15000 m |
| Technical details | |
| Harmonized System (HS) code | 85078000 |
| Total carbon footprint (kg of CO2e) | 2447.6 |
| Compliance certificates | RoHS |
| Certificates | |
| Certification | C-tick, CE, CSA, EN 50091-1, EN 50091-2, EN 60950, FCC Part 15 Class A, GOST, IRAM, UL 1778, VDE, REACH |
| Compliance certificates | RoHS |
| Packaging content | |
| Quick installation guide | Yes |
| Cables included | RS-232, USB cable |
| Rack mount kit | Yes |
| Manual | Yes |
| Management card included | No |
| Software CD | Yes |
| Weight & dimensions | |
| Package width | 586 mm |
| Package depth | 633 mm |
| Package height | 330 mm |
| Weight | 38.6 kg |
| Width | 178 mm |
| Package weight | 47.7 kg |
| Height | 432 mm |
| Depth | 483 mm |
| Packaging data | |
| Quick installation guide | Yes |
| Cables included | RS-232, USB cable |
| Rack mount kit | Yes |
| Manual | Yes |
| Software CD | Yes |
| Package width | 586 mm |
| Package depth | 633 mm |
| Package height | 330 mm |
| Package weight | 47.7 kg |
| Management card included | No |
| Logistics data | |
| Products per pallet | 6 pcs |
| Harmonized System (HS) code | 85078000 |
| Total carbon footprint (kg of CO2e) | 2447.6 |
| Other features | |
| Nominal output voltage | 230 V |
| Identifiers | |
| Additional EANs | 5054533528789 |

Reviews
Clear filtersThere are no reviews yet.