APC Smart-UPS X SMX3000RMHV2U Line-Interactive UPS, 3kVA, 2700W, 2U Rack/Tower, 8x C13 + 1x C19
£2,826.55
In stock
In stock
- Free Premium delivery on UK mainland orders
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 3kVA capacity with 2700W output
- Line-interactive topology with pure sine-wave output
- Nine outlets: eight C13 and one C19
- 2U rackmount/tower-convertible design
- Typical runtime: 18 minutes at half load
- SmartSlot supports optional network management cards
- Hot-swappable sealed lead-acid battery
You may also like
APC Smart-UPS X SMX3000RMHV2U – maintain power during outages
The APC Smart-UPS X SMX3000RMHV2U suits businesses protecting servers, network equipment and other critical IT systems. Its 3kVA line-interactive design supplies pure sine wave battery power when mains power fails.
Key specifications for planning
| Metric | Specification |
|---|---|
| Output capacity | 3kVA / 2700W |
| Output voltage | 208–240V |
| Output sockets | 8 × C13 and 1 × C19 |
| Form factor | 2U rackmount or tower |
| Typical runtime at half load | 18 minutes |
| Typical runtime at full load | 6.25 minutes |
Keep essential systems running
Automatic Voltage Regulation helps manage voltage fluctuations, while surge protection helps protect connected equipment. During a power cut, the UPS switches to battery power automatically. At full load, typical runtime is 6.25 minutes, giving systems time for a controlled shutdown.
The battery is hot-swappable, so you can replace it without switching off the UPS or connected equipment. Automatic battery testing and a battery-replacement indicator also help you monitor battery condition.
Adapt the installation as your needs change
Use the unit as a 2U rackmount UPS or set it up as a tower. Its nine output sockets include eight C13 and one C19, with three switchable outlet groups for managing connected loads. You can phase equipment start-up, reset a group remotely with an optional network card, or switch off non-critical equipment to preserve runtime.
A SmartSlot supports an optional network management card for remote monitoring and shutdown management. You can also connect compatible SMX120RMBP2U external battery packs to extend runtime. These packs and the network card are sold separately.
Included in the box
- Rack-mounting kit
- RS-232 and USB cables
- Quick installation guide and manual
Check your setup before ordering
- Confirm your equipment’s combined load stays within the 2700W output rating.
- Check that your rack has 2U of space and enough depth for the 667mm-deep unit.
- Confirm your equipment uses C13 or C19 power connections.
- Check whether you need external battery packs or a network management card for your installation.
Frequently Asked Questions
Q: How long will it run at full load?
A: Typical runtime at full load is 6.25 minutes. Actual runtime depends on the connected load.
Q: Can I install it outside a rack?
A: Yes. The UPS converts between rackmount and tower use, and includes rack-mounting hardware.
Q: Can I extend its runtime?
A: Yes. It supports up to 10 compatible SMX120RMBP2U external battery packs, sold separately.
Q: Does it include a network management card?
A: No. A compatible card can be added to the SmartSlot for remote management.
A practical choice for business continuity
Choose the APC Smart-UPS X SMX3000RMHV2U to protect critical equipment with 2700W of sine wave backup power, flexible rack or tower installation and replaceable batteries. The UPS has a three-year warranty, while its battery has a two-year warranty.
| Power | |
|---|---|
| Output frequency regulation | 50/60 Hz |
| Output power | 2700 W |
| Output operation voltage (min) | 208 V |
| Output operation voltage (max) | 240 V |
| Surge energy rating | 645 J |
| Efficiency | 98.5% |
| Emergency Power Off (EPO) | Yes |
| Crest factor | 3:1 |
| Output power capacity | 3 kVA |
| Ports & interfaces | |
| Cable length | 1.83 m |
| SmartSlot | Yes |
| AC outlets quantity | 9 AC outlets |
| AC outlet types | C13 coupler, C19 coupler |
| Power plug | C20 coupler |
| Number of output IEC jumpers | 2 |
| SmartConnect port | No |
| Performance | |
| Hold time (min) | 2 ms |
| Hold time (max) | 10 ms |
| UPS topology | Line-Interactive |
| Waveform | Sine |
| Auto-restart | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| LED indicators | Battery replacement |
| Surge protection | Yes |
| Noise level | 55 dB |
| Audible alarms | Yes |
| Features | |
| Hold time (min) | 2 ms |
| Hold time (max) | 10 ms |
| UPS topology | Line-Interactive |
| Waveform | Sine |
| Output frequency regulation | 50/60 Hz |
| Auto-restart | Yes |
| Automatic Voltage Regulation (AVR) | Yes |
| Output power | 2700 W |
| Output operation voltage (min) | 208 V |
| Output operation voltage (max) | 240 V |
| Surge energy rating | 645 J |
| Efficiency | 98.5% |
| Surge protection | Yes |
| Emergency Power Off (EPO) | Yes |
| Noise level | 55 dB |
| Crest factor | 3:1 |
| Audible alarms | Yes |
| Output power capacity | 3 kVA |
| Input frequency | 50/60 Hz |
| Battery | |
| Battery life (max) | 5 years |
| Battery capacity | 738 VAh |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 3 h |
| Typical backup time at half load | 18 min |
| Typical backup time at full load | 6.25 min |
| Hot-swap battery | Yes |
| Automatic battery test | Yes |
| Design | |
| Rack capacity | 2U |
| Form factor | Rackmount/Tower |
| LED indicators | Battery replacement |
| Product colour | Black |
| Certification | CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, UL 1778, VDE, REACH, PEP, EOLI |
| Cable length | 1.83 m |
| Operational conditions | |
| Operating temperature | 0 - 40 °C |
| Storage temperature | -15 - 45 °C |
| Operating relative humidity | 0 - 95% |
| Storage relative humidity | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 15000 m |
| Technical details | |
| Harmonized System (HS) code | 85078000 |
| Total carbon footprint (kg of CO2e) | 2723.78 |
| Compliance certificates | RoHS |
| Certificates | |
| Certification | CE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, UL 1778, VDE, REACH, PEP, EOLI |
| Compliance certificates | RoHS |
| Packaging content | |
| Quick installation guide | Yes |
| Cables included | RS-232, USB cable |
| Rack mount kit | Yes |
| Manual | Yes |
| Management card included | No |
| Software CD | Yes |
| Weight & dimensions | |
| Package width | 596 mm |
| Package depth | 869 mm |
| Package height | 243 mm |
| Weight | 37.3 kg |
| Width | 432 mm |
| Package weight | 45.4 kg |
| Height | 85 mm |
| Depth | 667 mm |
| Packaging data | |
| Quick installation guide | Yes |
| Cables included | RS-232, USB cable |
| Rack mount kit | Yes |
| Manual | Yes |
| Software CD | Yes |
| Package width | 596 mm |
| Package depth | 869 mm |
| Package height | 243 mm |
| Package weight | 45.4 kg |
| Management card included | No |
| Logistics data | |
| Products per pallet | 8 pcs |
| Harmonized System (HS) code | 85078000 |
| Total carbon footprint (kg of CO2e) | 2723.78 |
| Other features | |
| Nominal output voltage | 230 V |
| Nominal input voltage | 230 V |
| Identifiers | |
| Additional EANs | 7313042685290 |

Reviews
Clear filtersThere are no reviews yet.