Arctic Liquid Freezer III Pro 360 Black

Arctic Liquid Freezer III Pro 360 (Black) | High-Static Pressure AIO

The Arctic Liquid Freezer III Pro 360 (Black) is an all-in-one liquid CPU cooler designed for demanding gaming and workstation builds. It features an in-house developed PWM-controlled pump and a 38 mm thick radiator for improved heat dissipation. This cooler targets users who require efficient thermal management for AMD AM4/AM5 and Intel 1700/1851 sockets, prioritising low noise levels under load.

Key Specifications

Enhanced VRM Cooling

The cooler includes a PWM-controlled 60 mm fan positioned near the pump. This fan actively cools the motherboard’s VRM circuits. It is particularly useful in overclocking scenarios or cases with limited airflow. This ensures stable power delivery to your processor during intensive tasks.

Optimised Pump and Cold Plate

Arctic has developed the water pump specifically for this series. It operates with PWM control, adjusting speed based on CPU temperature to balance performance and acoustics. The cold plate features an extended fin surface and optimised water pipes. This design increases thermal transfer efficiency while maintaining quiet operation.

Expanded Radiator Surface

The radiator measures 38 mm thick, which is 23% larger in surface area than standard designs. This extended fin stack allows for better heat dissipation. It also increases the liquid volume, improving thermal capacity for sustained loads. The unit comes with pre-installed fans in a push configuration for immediate use.

High-Static Pressure Fan Design

The Liquid Freezer III Pro uses fans from the P Pro series. These fans are engineered for high static pressure, which is critical for forcing air through the dense radiator fins. They operate between 600 and 3000 RPM, delivering up to 77 CFM of airflow. This ensures effective cooling even under heavy thermal loads.

Integrated Control and Installation

A splitter cable allows separate control or synchronisation of the pump, VRM fan, and radiator fans via a single PWM signal. The unit is ready to install out of the box. Arctic includes MX-6 thermal paste, eliminating the need for separate purchase. Verify your case has space for a 360 mm radiator and adequate clearance for the 63 mm fan height.

Arctic Liquid Freezer III Pro 360 (Black)

Box contents

• Arctic Liquid Freezer III Pro 360 radiator with pre-installed fans
• MX-6 thermal paste
• Splitter cable for PWM control
• Mounting hardware for supported sockets

Check before you buy

• Confirm your PC case supports a 360 mm radiator mount (top, front, or side).
• Verify physical clearance for the 398 mm width and 63 mm fan height.
• Check motherboard socket compatibility: AMD AM4/AM5 or Intel 1700/1851.
• Ensure your motherboard has a 4-pin PWM header for the pump and fan control.

Frequently Asked Questions

Our recommendation

The Arctic Liquid Freezer III Pro 360 (Black) suits enthusiasts building high-performance gaming PCs or workstations on AMD AM4/AM5 or Intel 1700/1851 platforms. Its thick radiator, high-pressure fans, and integrated VRM cooling offer a robust solution for overclocking or sustained heavy loads. The unit is designed for users prioritising thermal headroom and acoustic control. Covered by the applicable manufacturer warranty.