ASRock WS TR 360D All-in-One Liquid Cooler for sTR5, SP6, sWRX9, sWRX8, sTRX4, TR4 and SP3, Black, Aluminium
£333.10
In stock
In stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Dual-pump all-in-one liquid cooling architecture
- Socket support: sTR5, SP6, sWRX9, sWRX8, sTRX4, TR4, SP3
- Fan speeds up to 3000 RPM
- Airflow up to 89.7 CFM; pressure up to 4.7 mmH₂O
- 4-pin fan and 3-pin pump connectors
- Aluminium radiator with copper water block
- 120 mm fan; radiator measures 40 × 12 × 3.8 cm
You may also like
Antec 360ARGB Liquid CPU Cooler, White, 360mm Radiator
In stock
Antec Symphony 360 ARGB White AIO Cooler
In stock
DeepCool LM360 Liquid Cooling Kit Black
In stock
be quiet! LIGHT LOOP 240mm White AIO Cooler
In stock
ASRock WS TR 360D – redundant cooling for workstation CPUs
The ASRock WS TR 360D suits workstation builders using supported AMD processor platforms. Its dual-pump design provides cooling redundancy for high-core processors running sustained workloads.
Key cooling specifications
| Metric | Specification |
|---|---|
| Cooler type | All-in-one liquid cooler |
| Supported sockets | sTR5, SP6, sWRX9, sWRX8, sTRX4, TR4 and SP3 |
| Radiator dimensions | 400 × 120 × 38 mm |
| Tube length | 450 mm |
| Maximum fan speed | 3,000 RPM |
| Maximum pump speed | 4,000 RPM |
Redundancy for sustained workloads
The dual-pump architecture supports continued cooling if one pump fails. A built-in buzzer sounds when a pump failure occurs, helping you respond promptly and reduce downtime risk.
The full-copper cold plate transfers heat from the processor. Its precision-brazed construction is designed for reliable operation during demanding workstation use.
Radiator and fan design
The 38 mm-thick aluminium radiator uses a high-density fin array to dissipate heat during heavy workloads. Three 120 mm fan dimensions are listed individually as 120 × 120 × 28 mm.
The fans support PWM control and can stop under low load for silent cooling. They use dual-ball bearings, with a maximum airflow of 89.7 CFM and maximum air pressure of 4.7 mmH₂O. At high speed, the stated noise level is 39.7 dB.
Installation details to plan for
The 450 mm tubes provide room to route the cooler within a compatible build. Tube clips help secure their placement, while the CNC-machined mounting system is designed to distribute pressure evenly across the cold plate.
ASRock Therm-X1 thermal grease comes pre-applied, simplifying installation. The fan uses a 4-pin connector, while the pump uses a 3-pin connector.
Before you order
- Confirm your processor uses one of the listed sockets: sTR5, SP6, sWRX9, sWRX8, sTRX4, TR4 or SP3.
- Check that your case can accommodate the 400 × 120 × 38 mm radiator.
- Confirm suitable connections are available for the 4-pin fan and 3-pin pump.
- Check that the 450 mm tubes can reach your planned radiator position.
Frequently Asked Questions
Q: Which processor sockets does this cooler support?
A: It supports sTR5, SP6, sWRX9, sWRX8, sTRX4, TR4 and SP3.
Q: What happens if one pump fails?
A: The built-in buzzer sounds if one pump fails.
Q: Can the fans stop when cooling demand is low?
A: Yes. The fans stop completely under low load for silent cooling.
Q: What connectors does the cooler use?
A: The fans use a 4-pin connector, and the pump uses a 3-pin connector.
A workstation-focused cooling choice
Choose the ASRock WS TR 360D for a supported AMD workstation build that needs dual-pump redundancy, a copper cold plate and cooling designed for sustained workloads. Check socket and radiator fit before ordering.
| Performance | |
|---|---|
| Suitable location | Processor |
| Fan connector | 4-pin |
| Pulse-width modulation (PWM) support | Yes |
| Bearing type | Dual ball bearing |
| Noise level (high speed) | 39.7 dB |
| Type | All-in-one liquid cooler |
| Fan diameter | 12 cm |
| Supported processor sockets | Socket sTR5, SP6, sWRX9, Socket sWRX8, Socket sTRX4, Socket TR4, Socket SP3 |
| Maximum airflow | 89.7 cfm |
| Maximum air pressure | 4.7 mmH2O |
| Pump connector | 3-pin |
| Pump motor speed (max) | 4000 RPM |
| Fan speed (max) | 3000 RPM |
| Design | |
| Fan connector | 4-pin |
| Product colour | Black, Aluminium |
| Radiator material | Aluminium |
| Water block material | Copper |
| Technical details | |
| Noise level (high speed) | 39.7 dB |
| Type | All-in-one liquid cooler |
| Fan diameter | 12 cm |
| Supported processor sockets | Socket sTR5, SP6, sWRX9, Socket sWRX8, Socket sTRX4, Socket TR4, Socket SP3 |
| Maximum airflow | 89.7 cfm |
| Maximum air pressure | 4.7 mmH2O |
| Fan connector | 4-pin |
| Ports & interfaces | |
| Fan connector | 4-pin |
| Pump connector | 3-pin |
| Power | |
| Pump voltage | 12 V |
| Pump current | 620 mA |
| Fan voltage | 12 V |
| Fan current | 0.36 A |
| Colour | |
| Product colour | Black, Aluminium |
| Weight & dimensions | |
| Fan dimensions (W x D x H) | 120 x 120 x 28 mm |
| Radiator width | 40 cm |
| Radiator depth | 12 cm |
| Radiator height | 3.8 cm |
| Tube length | 45 cm |
| Waterblock width | 11.9 cm |
| Waterblock depth | 7.89 cm |
| Waterblock height | 2.52 cm |
| Other features | |
| Pump connector | 3-pin |

Reviews
Clear filtersThere are no reviews yet.