ATEN SP100 SNMP Network Management Card for OL Series UPS, 2 x RJ-45 Ports

ATEN SP100 – manage an OL Series UPS over Ethernet

For anyone managing a compatible ATEN OL Series UPS, the ATEN SP100 provides direct network monitoring and control. It lets you check UPS status remotely without using a computer’s RS-232 port or installing UPS management software on a network server.

The essentials for your UPS

Connect the UPS to your Ethernet network

The SP100 connects a compatible UPS directly to an Ethernet network through its RJ-45 ports. This allows network-based monitoring without relying on a computer’s RS-232 connection.

Check UPS status remotely

The card communicates the UPS’s current status and can issue commands. So, authorised users can monitor and control the UPS from an off-site location.

Included in the box

• 1 x SP100
• 1 x Installation CD
• 1 x User Instructions

Check compatibility before ordering

• Confirm your UPS is one of the eight OL Series models listed above.
• Check that your UPS setup is suitable for an SNMP network management card.
• Confirm you can connect the card to your Ethernet network using an RJ-45 port.

Frequently Asked Questions

Q: Which UPS models work with the ATEN SP100?

A: It is compatible with OL1000LV, OL1500LV, OL2000LV, OL3000LV, OL1000HV, OL1500HV, OL2000HV and OL3000HV.

Q: How does the card connect to the network?

A: It connects directly to an Ethernet network through its two RJ-45 ports.

Q: Can I monitor the UPS remotely?

A: Yes. The card communicates UPS status and supports commands from an off-site location.

Q: Does it require UPS management software on a network server?

A: No. It connects the UPS to the network without loading individual UPS management software on the server.

A practical choice for compatible OL Series UPS units

Choose the ATEN SP100 if you want network-based UPS monitoring and remote control for a supported OL Series model. Its direct Ethernet connection helps you manage UPS status without using a computer’s RS-232 port.