Eaton 3P Ellipse 1.3 kVA/840 W Standby UPS, 8 C13 Outlets, USB 2.0
Original price was: £271.19.£257.62Current price is: £257.62.
In stock
In stock
Order today, get it by Mon 16 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Output capacity: 1.3 kVA, 840 W
- Standby UPS with stepwise waveform
- Eight C13 outlets with surge protection
- Two USB 2.0 ports and one Ethernet port
- Efficiency: 97%, with 25 dB noise level
- Black tower design, 81 × 305 × 312 mm
You may also like
Quantum MR-L7MQN-01 LTO-7 Blank Data Tape Cartridge, 6TB Native, 15TB Compressed
In stock
Fellowes Stellar A4 Paper Guillotine, 32 cm Cutting Length, 20-Sheet Capacity, Graphite/Yellow
In stock
BTI Replacement Projector Lamp for NEC MC342X, 225 W P-VIP
In stock
Eaton 3P Ellipse – quiet backup for connected equipment
The Eaton 3P Ellipse suits home offices and small workspaces that need power protection for several devices. Its 1.3 kVA capacity and eight C13 outlets make it easier to connect a group of essential equipment.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Output capacity | 1.3 kVA |
| Maximum output power | 840 W |
| UPS topology | Standby (offline) |
| AC outlets | 8 × C13 |
| USB ports | 2 × USB 2.0 |
| Noise level | 25 dB |
Connect several devices from one UPS
Eight C13 outlets give you room to connect equipment that uses compatible C13 power leads. Check the combined load before connecting it: the maximum output is 840 W. This helps you plan which devices to keep connected during a power interruption.
The unit also has two USB 2.0 ports and one RJ-45 Ethernet port. Surge protection is included, while the tower design keeps the UPS upright on or beside a desk.
Practical protection in a compact tower
This standby UPS uses a stepwise output waveform and supports single-phase input and output. Its input operating range is 161–284 V, with a nominal input voltage of 220–240 V.
At 25 dB, it is suited to work areas where low operating noise matters. The LED display and button controls provide a straightforward way to check and operate the unit.
What comes in the box
- USB cable
- Quick installation guide
Check before you order
- Confirm your devices use C13 power leads.
- Check that their combined power draw stays within the 840 W limit.
- Confirm the available mains supply is suitable for the 220–240 V nominal input.
- Check that the tower dimensions, 81 × 305 × 312 mm, suit your intended space.
Frequently Asked Questions
Q: How many AC outlets does it have?
A: It has eight C13 AC outlets.
Q: What is its maximum output power?
A: Maximum output power is 840 W, with a rated capacity of 1.3 kVA.
Q: Does it include USB connections?
A: Yes. It has two USB 2.0 ports and comes with a USB cable.
Q: What type of UPS is it?
A: It is a standby (offline) UPS with a stepwise output waveform.
A good fit for multi-device workspaces
Choose the Eaton 3P Ellipse if you need a quiet standby UPS with eight C13 outlets and surge protection. Its 840 W limit makes checking your equipment’s combined load essential before ordering.
| Power | |
|---|---|
| Output power factor | 0.6 |
| Output power | 840 W |
| Input operation voltage (min) | 161 V |
| Input operation voltage (max) | 284 V |
| Output operation voltage (min) | 161 V |
| Output operation voltage (max) | 284 V |
| Efficiency | 97% |
| Output power capacity | 1.3 kVA |
| Efficiency (ECO mode) | 97% |
| Performance | |
| UPS topology | Standby (Offline) |
| Waveform | Stepwise |
| Number of output phases | 1 |
| Number of input phases | 1 |
| Surge protection | Yes |
| Noise level | 25 dB |
| Features | |
| Output frequency | 50/60 Hz |
| UPS topology | Standby (Offline) |
| Waveform | Stepwise |
| Number of output phases | 1 |
| Number of input phases | 1 |
| Output power factor | 0.6 |
| Output power | 840 W |
| Input operation voltage (min) | 161 V |
| Input operation voltage (max) | 284 V |
| Output operation voltage (min) | 161 V |
| Output operation voltage (max) | 284 V |
| Efficiency | 97% |
| Surge protection | Yes |
| Noise level | 25 dB |
| Output power capacity | 1.3 kVA |
| Efficiency (ECO mode) | 97% |
| Input frequency | 46/70 Hz |
| Auto shut-off | Yes |
| Power consumption (average operating) | 26 W |
| Package type | Box |
| Ports & interfaces | |
| USB port | Yes |
| AC outlets quantity | 8 AC outlets |
| AC outlet types | C13 coupler |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN (RJ-45) ports | 1 |
| Battery | |
| Battery voltage | 12 V |
| Battery capacity | 7 Ah |
| Design | |
| Form factor | Tower |
| Product colour | Black |
| Certification | IEC/EN 62040-1 IEC/EN 62040-2 IEC/EN 62040-3 CE UKCA Ukr Cm |
| Control type | Buttons |
| Display type | LED |
| Operational conditions | |
| Operating temperature | 0 - 40 °C |
| Technical details | |
| Output frequency | 50/60 Hz |
| Compliance certificates | CB, CE, RoHS, WEEE |
| Certificates | |
| Certification | IEC/EN 62040-1 IEC/EN 62040-2 IEC/EN 62040-3 CE UKCA Ukr Cm |
| Waste Electrical and Electronic Equipment (WEEE) compliance | Yes |
| Compliance certificates | CB, CE, RoHS, WEEE |
| Packaging content | |
| Quick installation guide | Yes |
| Cables included | USB cable |
| Certification | |
| Waste Electrical and Electronic Equipment (WEEE) compliance | Yes |
| Weight & dimensions | |
| Package type | Box |
| Weight | 7 kg |
| Width | 81 mm |
| Height | 305 mm |
| Depth | 312 mm |
| Packaging data | |
| Quick installation guide | Yes |
| Cables included | USB cable |
| Package type | Box |
| Other features | |
| Input connection type | C14 |
| Relative humidity | 0 - 95% |
| Nominal input voltage | 220-240 V |
Reviews
Clear filtersThere are no reviews yet.