Eaton 9PX5KIRTN Online UPS, 5 kVA/4500 W, 11 AC outlets, 3U Rackmount/Tower, Pure Sine Wave

Eaton 9PX5KIRTN – online power protection for critical equipment

The Eaton 9PX5KIRTN suits server rooms, IT racks and infrastructure that need dependable power protection. Its online double-conversion design provides a pure sine wave output, with up to 4,500 W of power for connected equipment.

Key specifications at a glance

Continuous protection for connected systems

Online double conversion converts incoming power to DC, then back to AC. This helps maintain a consistent supply for connected equipment when the mains supply fluctuates. The pure sine wave output is suited to sensitive IT equipment.

The UPS delivers a nominal 230 V output, with an operating range of 200–240 V. Its 0.9 power factor provides 4,500 W of usable power from a 5 kVA capacity.

Practical battery and management features

Sealed lead-acid batteries provide a typical 13 minutes of backup at half load. The batteries are hot-swappable, and automatic battery testing helps monitor their condition.

A front LCD and LED indicators make status checks straightforward. USB and RS-232 connections support management, while an included management card and Intelligent Power Software suite provide further monitoring options.

Flexible installation for IT spaces

Use the unit as a 3U rackmount UPS or in tower orientation. It measures 440 mm wide, 130 mm high and 685 mm deep, and weighs 48 kg. A rack-mount kit is included.

The unit has 11 AC outlets, including C13 and C19 couplers and a terminal connection. Its rated noise level is 45 dB, so consider placement when planning an installation near people.

Check your setup before ordering

• Confirm your equipment’s combined load stays within 4,500 W.
• Check that your rack or installation space accommodates a 3U unit measuring 440 × 130 × 685 mm.
• Confirm your connected equipment can use the available C13, C19 or terminal outlets.
• Check that your power setup suits a single-phase, nominal 230 V UPS.

Frequently Asked Questions

Q: What is the UPS’s maximum output?

A: It provides up to 4,500 W, with a power capacity of 5 kVA.

Q: How long will the battery last at half load?

A: Typical backup time at half load is 13 minutes.

Q: Can the batteries be changed while the UPS is operating?

A: Yes. The UPS has hot-swappable batteries and automatic battery testing.

Q: Can it be installed in a rack or as a tower?

A: Yes. It supports rackmount or tower installation and occupies 3U in a rack.

A strong fit for essential IT loads

Choose the Eaton 9PX5KIRTN when your setup needs online power protection, substantial output capacity and flexible installation. Its hot-swappable batteries, management connections and 11 outlets make it well suited to IT environments.