HPE 200GbE QSFP56 to 2 x QSFP56 Direct Attach Copper Cable, 2.5 m
£1,044.59
In stock
In stock
- Free Premium delivery on UK mainland orders
Order now, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Data rate: 200GbE
- Cable type: Direct attach copper (DAC)
- Connector 1: QSFP56
- Connector 2: 2 × QSFP56
- Cable length: 2.5 m
You may also like
HPE 200GbE QSFP56 – connect one QSFP56 port to two
The HPE 200GbE QSFP56 cable suits network setups that need a direct connection from one QSFP56 port to two QSFP56 ports. Its copper DAC design provides a practical 2.5-metre link without adding a separate fibre cable.
Key details at a glance
| Metric | Specification |
|---|---|
| Cable type | Direct attach copper (DAC) |
| Connector 1 | QSFP56 |
| Connector 2 | 2 × QSFP56 |
| Maximum transfer distance | 2.5 m |
| Weight | 334 g |
Connect one port to two
One end has a QSFP56 connector, while the other has two QSFP56 connectors. This arrangement is suited to equipment layouts that require this connector configuration. Confirm that your devices support the intended connection.
Choose a suitable cable run
At 2.5 metres, the cable supports a short run between nearby devices. Measure the route before ordering, allowing enough length for the cable to reach without strain.
The direct attach copper construction makes this a specific choice for QSFP56 connections. Check your equipment documentation to confirm that a DAC cable is suitable for your setup.
Before you order
- Confirm your equipment has the required QSFP56 ports.
- Check that your intended configuration supports one QSFP56 connection to two QSFP56 connections.
- Measure the cable route and confirm 2.5 m is sufficient.
- Check that direct attach copper is suitable for your equipment.
Frequently Asked Questions
Q: What connectors does this cable have?
A: It has one QSFP56 connector at one end and two QSFP56 connectors at the other.
Q: How long is the cable?
A: Its maximum transfer distance is 2.5 metres.
Q: What type of cable is it?
A: It is a direct attach copper cable, also known as a DAC.
A focused choice for QSFP56 setups
Choose the HPE 200GbE QSFP56 cable when your setup needs a 2.5-metre copper DAC with one QSFP56 connector and two QSFP56 connectors at the other end.
| Features | |
|---|---|
| Fibre mode structure | Multi-mode |
| Connector 1 | QSFP56 |
| Connector 2 | 2x QSFP56 |
| Cable type | DAC |
| Maximum transfer distance | 2.5 m |
| Weight & dimensions | |
| Weight | 334 g |
| Technical details | |
| Fibre mode structure | Multi-mode |
| Connector 1 | QSFP56 |
| Connector 2 | 2x QSFP56 |
| Cable type | DAC |
| Weight (imperial) | 0.336 kg (0.74 lbs) |
| Other features | |
| Weight (imperial) | 0.336 kg (0.74 lbs) |

Reviews
Clear filtersThere are no reviews yet.