HPE G2 Metered Three-Phase PDU, 0U Vertical, 208V 48A, 36 x C13 and 12 x C19 Outlets
£3,278.20
In stock
In stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Three-phase, 208V input with 48A maximum current
- 48 outlets: 36 C13 and 12 C19
- 0U vertical mounting for HPE and compatible third-party racks
- Metered load segments support rack-level power monitoring
- North American/Japanese configuration
- Hot-swappable network management card keeps power distributed during removal
- Rated for operating temperatures up to 60°C
You may also like
Lindy 1U Horizontal PDU, 6x UK Type G Sockets, On/Off Switch, 3m Cable, 3250W, Black
In stock
Lindy 1U Horizontal PDU 6 Way UK Sockets IEC C14 Cable 3m On/Off Switch Black
In stock
HPE G2 Metered PDU – monitor rack power by load segment
The HPE G2 Metered PDU suits data centres and co-location racks that need clear visibility of power use. Its metering by load segment helps you monitor circuit capacity and track usage across the rack. This is the North American/Japanese 208V version, so confirm your supply and equipment match before ordering.
Essential specifications for rack planning
| Metric | Specification |
|---|---|
| PDU type | Metered, three-phase |
| Input voltage | 208V |
| Maximum current | 48A |
| Mounting | Vertical, 0U rack capacity |
| Outlets | 48 total: 36 C13 and 12 C19 |
| Dimensions | 52mm wide × 112mm deep × 1820mm high |
See power use by load segment
Load-segment metering gives you a clearer view of how power is distributed across connected equipment. This can help you manage circuit capacity and track usage in co-location environments. The PDU also supports rack-level power monitoring over the network.
Fit the PDU around your rack layout
The vertical 0U design uses no rack unit space, leaving that space available for other equipment. Its slim 52mm width and 112mm depth help with placement, while the 1820mm height makes rack clearance an important check.
HPE designed this PDU for its own racks, and it also supports a range of third-party racks using standard button and keyhole mounting. You can install it on either side of the rack, with outlets facing the rear for access. For higher-density setups, two units can sit on opposite sides with outlets facing inwards.
Maintain power and monitor rack conditions
A hot-swappable Network Management Card allows power distribution to continue while the card is removed. Colour-coded receptacles help distinguish load segments or phases. Optional environmental sensors can monitor temperature, humidity, intrusion and water leakage inside the rack.
Check your rack and equipment before ordering
- Confirm your rack has vertical mounting points that accept standard button and keyhole mounting.
- Check your supply is 208V, three-phase, and suitable for a maximum current of 48A.
- Confirm your equipment uses the 36 C13 and 12 C19 outlet mix.
- Check your rack has clearance for a PDU measuring 1820mm high, 52mm wide and 112mm deep.
Frequently Asked Questions
Q: How many outlets does this PDU have?
A: It has 48 outlets: 36 C13 and 12 C19.
Q: Does it use rack unit space?
A: No. It mounts vertically with a 0U rack capacity.
Q: Can it monitor power over a network?
A: Yes. It supports rack-level power monitoring over the network, with metering by load segment.
Q: Can I use it in a third-party rack?
A: It supports a range of third-party racks with standard button and keyhole mounting.
A practical choice for metered rack power
Choose the HPE G2 Metered PDU when you need vertical, 0U power distribution with network monitoring and a mix of C13 and C19 outlets. Check the 208V regional version, rack mounting and outlet requirements against your installation before ordering.
| Design | |
|---|---|
| Type | Three-phase |
| PDU types | Metered |
| Mounting | Vertical |
| Rack capacity | 0U |
| Ports & interfaces | |
| AC outlets quantity | 48 AC outlets |
| AC outlet types | C13 coupler, C19 coupler |
| Power | |
| Nominal input voltage | 208 V |
| Maximum current | 48 A |
| Load capacity | 10000 VA |
| Weight & dimensions | |
| Weight | 14.1 kg |
| Weight (imperial) | 14.1 kg (31 lbs) |
| Width | 52 mm |
| Depth | 112 mm |
| Height | 1820 mm |
| Identifiers | |
| Additional EANs | 1900170798518 |

Reviews
Clear filtersThere are no reviews yet.