HPE Networking Comware 2150 Managed Gigabit Switch, 48-Port PoE+, 4 x 1/10Gb SFP+ Uplinks, 390W

SKU: S6X53A#ACC

£1,172.47

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order today, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 176 Gbps forwarding capacity for demanding networks
  • 48 Gigabit PoE+ ports and four 1/10Gb SFP+ uplinks
  • 390 W PoE budget with Class 4 support
  • Layer 3 managed switching with stackable IRF technology
  • 1U rack-mountable enclosure with mounting kit included
  • CLI, SNMP and RestAPI remote management
Description

HPE Comware 2150 – managed PoE+ for dense networks

The HPE Comware 2150 suits business networks that need many wired connections and PoE+ power from one managed switch. Its 48 Gigabit Ethernet ports and 390 W PoE budget make it a practical choice for consolidating compatible powered devices.

Core capacity and connectivity

Metric Specification
Copper ports 48 x 10/100/1000Base-T PoE+
Uplink ports 4 x 1/10Gb SFP+
PoE budget 390 W
Forwarding capacity 176 Gbps
Form factor Rack-mountable 1U
Maximum stack size 9 units

Power compatible devices over Ethernet

PoE+ can supply power and network connectivity through the same cable to compatible equipment. The shared 390 W budget helps you plan a group of powered devices across the 48 access ports. Check the combined power requirements of your equipment before deployment.

Use high-speed uplinks and stacking

Four SFP+ ports support 1Gb or 10Gb uplinks, giving you options for fibre connections to other network equipment. The ports also support stacking. With IRF technology and support for up to nine units in a stack, you can plan a larger managed access layer around linked switches.

Manage traffic and network access

This is a Layer 3 managed switch with IPv4 and IPv6 support. It supports RIP-2 and policy-based routing, alongside features such as IGMP snooping, MLD and advanced QoS. These tools help administrators manage routing, multicast traffic and service priorities.

For administration, the switch supports CLI, SNMP and REST API. RADIUS and HWTACACS authentication are also supported. HPE Intelligent Management Center is included for network management.

Check your rack, power and port plan

  • Confirm your rack has space for a 1U switch measuring 44 cm wide, 26 cm deep and 4.4 cm high.
  • Check that your planned PoE+ equipment stays within the 390 W shared budget.
  • Confirm your uplink plan uses the 1Gb or 10Gb SFP+ ports.
  • Check that your network management tools support CLI, SNMP or REST API.

Frequently Asked Questions

Q: How many PoE+ ports does the switch have?

A: It has 48 10/100/1000Base-T PoE+ ports and a shared 390 W PoE budget.

Q: What uplink speeds are supported?

A: Its four SFP+ uplink ports support 1Gb and 10Gb connections.

Q: Can the switch be stacked?

A: Yes. It supports IRF stacking, with up to nine units in a stack.

Q: What management options does it support?

A: It supports CLI, SNMP 1, SNMP 2c, SNMP 3 and REST API management.

A strong fit for managed access networks

Choose the HPE Comware 2150 when you need 48 Gigabit PoE+ connections, flexible SFP+ uplinks and Layer 3 management in a 1U rack unit. It also carries a lifetime limited warranty.

Additional information
BrandHewlett Packard Enterprise
MPNS6X53A#ACC
Device TypeSwitch – 48 ports – L3 – Managed – stackable
Enclosure TypeRack-mountable 1U
SubtypeGigabit Ethernet
Ports48 x 10/100/1000Base-T (PoE+) + 4 x 1 Gigabit, 10 Gigabit SFP+ (uplink, stacking)
PoE Budget390 W
PerformanceForwarding capacity: 176 Gbps, Throughput: 131 Mbps, Latency (1 Gbps): &lt, 5 µs, Latency (10 Gbps): &lt, 3 µs
CapacitySwitched virtual interfaces (SVIs): 32, IPv4 routes: 1500, IPv4 host table (ARP): 1024, IPv6 routes: 512, IPv6 host table (ND): 512, IGMP groups: 500, MLD groups: 500, ACL entries (ingress/egress): 1024, VRF instances: 32, Packet buffer size: 1.5 MB
MAC Address Table Size16K entries
Jumbo Frame Support9000 bytes
Max Units In A Stack9
Routing ProtocolRIP-2, policy-based routing (PBR)
Remote Management ProtocolCLI, SNMP 1, SNMP 2c, SNMP 3, RestAPI
Authentication MethodRADIUS, HWTACACS
FeaturesPoE Class 4, 2 fans, IPv6 support, sFlow, IRF Technology, BFD, DLDP support, IPv4 and IPv6 dual stack, MVR, MLD, IGMP snooping, port mirroring, RRPP, Auto-MDI/MDIX support, 6 KV surge protection, Advanced Quality of Service (QoS)
Flash Memory512 MB
Interfaces48 x 10/100/1000Base-T RJ-45 PoE+, 4 x 1/10GBase-X SFP+ uplink/stacking, 1 x console USB Type-C, 1 x console RJ-45, 1 x management RJ-45 out-of-band network management
Power DeviceInternal power supply
Voltage RequiredAC 90-290 V
Power Consumption Operational54 watt
Power Consumption Stand by29 watt
Rack Mounting KitIncluded
Compliant StandardsUL 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, IEC 62368-1, CAN/CSA-C22.2 No. 60950-1, EN 62368-1/A11, FDA 21 CFR Subchapter J, RoHS, EMC 2004/108/EC, FCC CFR 47 Part 15 Class A, EN 61000-4-11:2004, ANSI C63.4-2009, EN 61000-3-3:2008, VCCI V-3/2012.04, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-3:2006, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, CISPR 22:2008 (International) Class A, EN 55022:2010 Class A, EN 61000-4-29:2000, CISPR 24:2010, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, EN55024, EN 300 386
LocalisationEnglish, United Kingdom
Software IncludedHPE Intelligent Management Center
Width44 cm
Depth26 cm
Height4.4 cm
Weight4.1 kg
Service SupportLimited warranty – lifetime
Min Operating Temperature-5 °C
Max Operating Temperature50 °C
Humidity Range Operating5 – 95% (non-condensing)
Min Storage Temperature-40 °C
Max Storage Temperature70 °C
Humidity Range Storage5 – 95% (non-condensing)

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.