HPE Networking Comware 2150 48-Port Gigabit PoE+ Managed Switch, 4 x 1/10G SFP+, 770W PoE Budget, 176 Gbps Switching Capacity
£1,503.25
In stock
In stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 48-port Gigabit Ethernet switching with PoE+
- Four 1/10G SFP+ uplink and stacking ports
- 176 Gbps switching capacity
- 770 W PoE budget
- Layer 3 managed, stackable to nine units
- 1U rack-mountable enclosure with kit included
You may also like
HPE Networking Comware 2150 – connect and power network devices
The HPE Networking Comware 2150 suits business networks that need managed access for wired and PoE+ devices. Its 48 Gigabit Ethernet ports and 770W PoE budget provide substantial capacity for connecting and powering equipment.
Key specs at a glance
| Metric | Specification |
|---|---|
| Ethernet ports | 48 x 10/100/1000Base-T PoE+ |
| Uplink ports | 4 x 1/10G SFP+ |
| PoE budget | 770W |
| Switching capacity | 176 Gbps |
| Rack size | 1U |
| Maximum stack size | 9 units |
Power PoE+ devices from the switch
PoE+ delivers network connectivity and power over Ethernet to compatible devices. This can simplify connections for equipment such as access points and IP phones. The switch has a shared 770W PoE budget, so check that your planned devices’ combined power needs fit within it.
Link access ports to high-speed uplinks
The 48 copper ports support Gigabit Ethernet, while four SFP+ ports provide 1G or 10G uplink and stacking options. This gives you flexibility when connecting the switch to other network equipment. Its 176 Gbps switching capacity supports traffic across the network.
Manage routing and network traffic
This managed Layer 3 switch supports RIP-2 and policy-based routing. It also includes IPv4 and IPv6 support, QoS, IGMP snooping and access control lists. Administrators can manage it through CLI, SNMP or RestAPI, with RADIUS and HWTACACS authentication options.
IRF technology supports stacks of up to nine units. The 1U rack-mountable enclosure includes a rack mounting kit, and its dimensions are 44cm wide, 26cm deep and 4.4cm high.
Check your rack and network plan
- Confirm you have 1U of rack space and room for the 44cm-wide enclosure.
- Check that your network plan uses Gigabit Ethernet access ports and 1G or 10G SFP+ uplinks.
- Confirm the combined power requirements of your PoE+ devices fit within the 770W budget.
- Check that your AC supply falls within the switch’s 90–290V input range.
Frequently Asked Questions
Q: How many PoE+ ports does the switch have?
A: It has 48 10/100/1000Base-T ports with PoE+ support.
Q: What uplink speeds does it support?
A: Its four SFP+ uplink ports support 1G and 10G connections.
Q: Can it be stacked with other switches?
A: Yes. IRF technology supports stacks of up to nine units.
Q: Which management methods are supported?
A: Administrators can use CLI, SNMP 1, SNMP 2c, SNMP 3 and RestAPI.
A fit for managed access networks
Choose the HPE Networking Comware 2150 when you need 48 managed Gigabit ports, PoE+ power and flexible SFP+ uplinks in a 1U rack switch. Its routing and stacking features also suit networks that need room to grow.
| Brand | Hewlett Packard Enterprise |
|---|---|
| MPN | S6X54A#ACC |
| Device Type | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type | Rack-mountable 1U |
| Subtype | Gigabit Ethernet |
| Ports | 48 x 10/100/1000Base-T (PoE+) + 4 x 1 Gigabit, 10 Gigabit SFP+ (uplink, stacking) |
| PoE Budget | 770 W |
| Performance | Switching capacity: 176 Gbps, Throughput: 131 Mbps, Latency (1 Gbps): <, 5 µs, Latency (10 Gbps): <, 3 µs |
| Capacity | Switched virtual interfaces (SVIs): 32, IPv4 routes: 1500, IPv4 host table (ARP): 1024, IPv6 routes: 512, IPv6 host table (ND): 512, IGMP groups: 500, MLD groups: 500, ACL entries (ingress/egress): 1024, VRF instances: 32, Packet buffer size: 1.5 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9000 bytes |
| Max Units In A Stack | 9 |
| Routing Protocol | RIP-2, policy-based routing (PBR) |
| Remote Management Protocol | CLI, SNMP 1, SNMP 2c, SNMP 3, RestAPI |
| Authentication Method | RADIUS, HWTACACS |
| Features | QoS, PoE Class 4, 2 fans, IPv6 support, sFlow, IRF Technology, BFD, DLDP support, IPv4 and IPv6 dual stack, MVR, MLD, IGMP snooping, port mirroring, RRPP, Auto-MDI/MDIX support |
| Flash Memory | 512 MB |
| Interfaces | 48 x 10/100/1000Base-T RJ-45 PoE+ – 30 W, 4 x 1/10GBase-X SFP+ uplink/stacking, 1 x console USB Type-C, 1 x console RJ-45, 1 x management RJ-45 out-of-band network management |
| Power Device | Internal power supply |
| Voltage Required | AC 90-290 V |
| Power Consumption Operational | 56 watt |
| Power Consumption Stand by | 35 watt |
| Rack Mounting Kit | Included |
| Compliant Standards | UL 60950-1, EN 60825-1, EN 60825-2, IEC 60950-1, IEC 62368-1, CAN/CSA-C22.2 No. 60950-1, EN 62368-1/A11, FDA 21 CFR Subchapter J, RoHS, EMC 2004/108/EC, FCC CFR 47 Part 15 Class A, EN 61000-4-11:2004, ANSI C63.4-2009, EN 61000-3-3:2008, VCCI V-3/2012.04, EN 61000-3-2:2006+A1:2009+A2:2009, EN 61000-4-3:2006, EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2009, CISPR 22:2008 (International) Class A, EN 55022:2010 Class A, EN 61000-4-29:2000, CISPR 24:2010, EN 300 386 V1.6.1, VCCI V-3/2013.04 Class A, EN55024, EN 300 386 |
| Localisation | English, United Kingdom |
| Software Included | HPE Intelligent Management Center |
| Width | 44 cm |
| Depth | 26 cm |
| Height | 4.4 cm |
| Weight | 4.2 kg |
| Service Support | Limited warranty – lifetime |
| Min Operating Temperature | -5 °C |
| Max Operating Temperature | 50 °C |
| Humidity Range Operating | 5 – 95% (non-condensing) |
| Min Storage Temperature | -40 °C |
| Max Storage Temperature | 70 °C |
| Humidity Range Storage | 5 – 95% (non-condensing) |

Reviews
Clear filtersThere are no reviews yet.