HPE Networking X2A0 10 m Active Optical Cable, SFP+ to SFP+
£357.18
Out of stock
Out of stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 10G active optical cable
- InfiniBand protocol supported
- SFP+ male connectors at both ends
- 10 m cable length
- Single cable per pack
Available alternatives
You may also like
HPE Networking X2A0 – 10-metre SFP+ reach
The HPE Networking X2A0 suits network installations that need a 10-metre link between SFP+ ports. Its active optical design provides a single cable assembly with an SFP+ connector at each end.
Key details at a glance
| Metric | Specification |
|---|---|
| Cable type | Active optical cable |
| Length | 10 m |
| Connector 1 | SFP+, male |
| Connector 2 | SFP+, male |
| InfiniBand protocol | Supported |
| Pack quantity | 1 |
Extend your SFP+ connection
With 10 metres of cable, you have more reach between connected equipment than a short interconnect allows. Check the route and required cable length before ordering.
One assembly for both ends
The cable has male SFP+ connectors at both ends. This gives you a direct connection between two compatible SFP+ ports without needing separate cable-end connectors.
It is an active optical cable and supports the InfiniBand protocol. Confirm that your equipment supports the cable type and protocol required for your setup.
Check before you order
- Confirm both devices have compatible SFP+ ports.
- Check that a 10 m cable suits the planned route.
- Confirm your network setup uses the InfiniBand protocol if required.
Frequently Asked Questions
Q: How long is the HPE Networking X2A0?
A: It is 10 metres long.
Q: What connectors does this cable use?
A: It has a male SFP+ connector at each end.
Q: Does this cable support InfiniBand?
A: Yes, InfiniBand protocol support is specified.
A practical choice for a longer SFP+ link
Choose the HPE Networking X2A0 when your setup needs a 10-metre active optical cable with SFP+ connectors at both ends. Check port and protocol requirements first to ensure it suits your network.
| Features | |
|---|---|
| Connector 1 | SFP+ |
| Connector 2 | SFP+ |
| Cable length | 10 m |
| Connector 2 gender | Male |
| Connector 1 gender | Male |
| Data transfer rate | 10 Mbit/s |
| InfiniBand protocol | Yes |
| Harmonized System (HS) code | 84733080 |
| Weight & dimensions | |
| Weight | 140 g |
| Cable length | 10 m |
| Packaging content | |
| Quantity per pack | 1 pc |
| Technical details | |
| Connector 1 | SFP+ |
| Connector 2 | SFP+ |
| Cable length | 10 m |
| Weight (imperial) | 0.136 kg (0.3 lbs) |
| Packaging data | |
| Quantity per pack | 1 pc |
| Logistics data | |
| Quantity per pack | 1 pc |
| Harmonized System (HS) code | 84733080 |
| Other features | |
| Weight (imperial) | 0.136 kg (0.3 lbs) |
| Identifiers | |
| Additional EANs | 0190017042985 |

Reviews
Clear filtersThere are no reviews yet.