Kingston ValueRAM 8GB DDR4 3200MHz DIMM

Kingston Technology ValueRAM | 8GB DDR4-3200 DIMM

This Kingston Technology ValueRAM memory module 8 GB 1 x 8 GB DDR4 3200 MT/s is a single 8GB DIMM for desktop PCs and servers. It uses JEDEC-standard timings of 22-22-22 at 1.2V for straightforward compatibility. The module suits users upgrading older DDR4 systems or replacing a faulty stick. Because it follows JEDEC, it avoids manual XMP tuning. In practice, this suits business builds and home office PCs.

Slim Specs

Guaranteed JEDEC Compatibility

The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. So the module runs at a standard profile without BIOS tweaks. This reduces setup time and avoids unstable overclocks. However, you must confirm your motherboard supports DDR4-3200.

Unbuffered, Non-ECC Design

This is an unregistered (unbuffered) module with ECC: No. It suits consumer and entry-level server platforms that do not require error-correcting memory. Also, it uses a 1Rx8 module configuration of 1024M x 64. In practice, this fits most common DDR4 slots.

Build Quality and Materials

The DIMM uses gold contact fingers for reliable connectivity. It does not contain halogen and meets RoHS compliance. The country of origin is Taiwan. However, UKCA/CE compliance is not stated; confirm with your system integrator if required.

Thermal and Operating Range

Operating temperature range is 0–85 °C. Storage temperature range is -55–100 °C. Because these are JEDEC values, they suit typical UK environments. Also, verify airflow inside your case for sustained loads.

Physical Dimensions

Width is 133.3 mm and height is 31.2 mm. This is a standard 288-pin DIMM height. So it should fit under most stock CPU coolers. However, always check clearance if you use a large heatsink.

Box contents

• 1 x Kingston ValueRAM 8GB DDR4-3200 DIMM (KVR32N22S8/8)

Check before you buy

• Confirm your motherboard supports DDR4-3200 and 288-pin DIMM slots.
• Verify the system accepts unbuffered, non-ECC memory (ECC: No).
• Check BIOS/UEFI recognises JEDEC profiles; XMP is not required.
• Confirm physical clearance for a 31.2 mm height DIMM.

Frequently Asked Questions

Q: Is this module compatible with XMP?

A: No, it uses JEDEC standard timings; it does not require XMP profiles.

Q: Does this memory support ECC?

A: No, it is non-ECC and unbuffered for consumer and entry-level servers.

Q: What is the voltage?

A: It runs at 1.2 V, per JEDEC DDR4-3200 specification.

Q: Is this suitable for UK systems?

A: Yes, but confirm UKCA/CE compliance and warranty region with the seller.

Q: What is the form factor?

A: It is a 288-pin DIMM for desktop PCs and servers.

The Consultant’s verdict & warranty

Choose this module if you need a reliable 8GB DDR4-3200 upgrade that follows JEDEC standards without XMP tuning. It suits home office PCs, business desktops, and entry-level servers. Covered by the standard Manufacturer Warranty.