Origin Storage Matched Memory DDR4 UDIMM 16GB 3200MHz 1 x 16GB 2Rx8 Non-ECC 1.2V Memory

Origin Storage 16GB DDR4 3200MHz – Add memory to a compatible system

Origin Storage 16GB DDR4 3200MHz suits buyers upgrading a compatible PC or server. This single 16GB module provides a straightforward capacity increase where the system supports DDR4 UDIMM memory.

Key specifications for this memory module

One module for a targeted upgrade

The 1 x 16GB layout gives you one module to add or use in a compatible system. Check your motherboard or server documentation for supported memory capacity and configuration before ordering.

Because this is a UDIMM, it uses an unbuffered design. It is intended for systems that support unbuffered DDR4 DIMMs, rather than systems requiring a different memory type.

Check the memory fit and settings

This module runs at 1.2V and has a CAS latency of 21. Confirm that your system supports the module’s DDR4 speed and settings. The 288-pin DIMM form factor also needs a matching memory slot.

The memory is non-ECC, so it is suited to systems configured for non-ECC memory. It is not a substitute for ECC memory in a system that requires error correction.

Before you order

• Confirm your PC or server supports DDR4 UDIMM memory.
• Check that a compatible 288-pin DIMM slot is available.
• Confirm the system supports a 16GB module at 3200MHz.
• Check whether your system requires non-ECC memory.

Frequently Asked Questions

Q: How much memory does this module provide?

A: It provides 16GB in a single module.

Q: Is this memory ECC?

A: No. This is non-ECC memory.

Q: What operating systems are supported?

A: Windows and Linux operating systems are supported.

A practical choice for compatible DDR4 systems

Choose Origin Storage 16GB DDR4 3200MHz if your PC or server supports a 16GB, 288-pin, unbuffered non-ECC DDR4 DIMM. Verify the system’s memory requirements first to ensure the module fits its configuration.