Origin Storage 1.92TB SATA 2.5″ eMLC SSD, 3DWPD, Dell Server Hot-Swap Caddy
£2,622.76
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92TB eMLC SSD with 3DWPD endurance
- 550MB/s read and 520MB/s write speeds
- SATA 6Gbit/s interface for Dell servers
- 2.5-inch drive with hot-swap caddy
- Up to 95,000 read and 28,000 write IOPS
- Five-year warranty and enhanced power-loss protection
You may also like
Origin Storage 256GB SATA SSD, 3D TLC, 550 MB/s Read, 500 MB/s Write
In stock
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
Origin Storage 1.92TB SSD – dependable hot-swap server storage
The Origin Storage 1.92TB SSD suits Dell server and workstation upgrades where drive endurance and straightforward replacement matter. Its 3DWPD endurance rating and hot-swap caddy support demanding storage workloads and easier drive servicing.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity and memory | 1.92TB eMLC |
| Form factor | 2.5-inch |
| Interface | SATA, 6 Gbit/s |
| Sequential read and write | Up to 550 MB/s read, 520 MB/s write |
| Endurance | 3DWPD, 10,512 TBW |
| Warranty | 5 years |
Built for sustained server writes
The 3DWPD rating makes this SSD suitable for server workloads with frequent data writes. Its 10,512 TBW rating provides another useful endurance measure when planning storage for sustained use.
The drive uses eMLC NAND and includes active garbage collection. It also supports end-to-end data protection and enhanced power-loss data protection.
Hot-swap caddy for Dell servers
The supplied Dell server hot-swap caddy lets you install the drive in a compatible bay. Hot-swap support can make replacement more convenient when the server supports this function.
At 2.5 inches, the SSD uses a SATA interface rather than NVMe. Its rated sequential speeds reach 550 MB/s for reads and 520 MB/s for writes.
Check compatibility before ordering
- Confirm your Dell server accepts a 2.5-inch SATA hot-swap drive.
- Check that your server’s drive bay supports the included caddy.
- Confirm SATA storage suits your system, as this is not an NVMe SSD.
- Check that your operating system is Windows or Linux, both supported.
Frequently Asked Questions
Q: What capacity is this SSD?
A: It has 1.92TB of storage.
Q: Which interface does it use?
A: It uses a 6 Gbit/s SATA interface and is not an NVMe drive.
Q: Is the drive hot-swappable?
A: Yes. It supports hot-swap operation in a compatible Dell server bay.
Q: Which operating systems does it support?
A: Windows and Linux operating systems are supported.
Q: What warranty does it have?
A: It has a five-year warranty.
A practical choice for Dell server upgrades
Choose the Origin Storage 1.92TB SSD for a compatible Dell server needing high write endurance, SATA storage and a hot-swap caddy. Its 3DWPD rating, data protection features and five-year warranty make it a considered option for business storage.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | eMLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 2.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| Linux operating systems supported | Yes |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 2.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.3 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature | -40 - 85 °C |
| ECC | No |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD form factor | 2.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.