Origin Storage 1.92TB SATA SSD, 3.5″, 3DWPD, Hot-Swap Caddy for Dell Servers
£2,606.63
In stock
In stock
Order today, get it by Mon 16 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92 TB eMLC SSD capacity
- Read/write speeds of 550/520 MB/s
- SATA interface with 6 Gbit/s transfer rate
- 3.5-inch form factor with hot-swap caddy
- Compatible with Dell servers
- 3DWPD endurance for server/workstation use
You may also like
Origin Storage 3D TLC SATA SSD, 550MB/s Read, 500MB/s Write, for PC and Laptop
In stock
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
Origin Storage 1.92TB SATA SSD – hot-swap storage for Dell servers
For Dell server and workstation upgrades, we recommend the Origin Storage 1.92TB SATA SSD when endurance and serviceability matter. Its 3DWPD rating and hot-swap design suit demanding storage workloads and help simplify drive replacement.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 1.92 TB |
| Form factor | 3.5-inch |
| Interface | SATA, 6 Gbit/s |
| Rated speeds | Up to 550 MB/s read, 520 MB/s write |
| Random 4 KB performance | Up to 95,000 IOPS read, 28,000 IOPS write |
| Endurance | 3DWPD; 10,512 TBW |
Built for sustained server workloads
This SSD uses eMLC memory and carries a 3DWPD endurance rating. It is rated for 10,512 TBW, making it a practical choice for systems with regular write activity.
End-to-end data protection and enhanced power-loss protection help protect data during operation. Active garbage collection also supports ongoing drive management.
Hot-swap convenience in a 3.5-inch format
The drive supports hot-swap operation, so compatible server bays can allow replacement without shutting down the system. Confirm that your server supports hot-swapping before relying on this feature.
The 3.5-inch format suits compatible Dell server bays. A 2.5-inch-to-3.5-inch adapter is included, and the drive is listed as compatible with Dell servers.
Check your server fit
- Confirm your exact Dell server model supports this SATA drive.
- Check that your system has a compatible 3.5-inch bay and caddy arrangement.
- Confirm your server supports hot-swap operation if you need to replace drives while running.
- Check that your operating system is Windows or Linux, both supported.
Frequently Asked Questions
Q: Is this SSD compatible with Dell servers?
A: It is listed as compatible with Dell servers. Confirm compatibility with your specific server model before ordering.
Q: Does the drive support hot-swapping?
A: Yes. The drive supports hot-swap operation in a compatible server system.
Q: Which operating systems are supported?
A: Windows and Linux operating systems are supported.
Q: Is an adapter included?
A: Yes. A 2.5-inch-to-3.5-inch storage drive adapter is included.
A strong fit for Dell server upgrades
Choose the Origin Storage 1.92TB SATA SSD for a compatible Dell server that needs high-endurance storage and hot-swap support. We also note its five-year warranty for added ownership assurance.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | eMLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| Linux operating systems supported | Yes |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.3 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature | -40 - 85 °C |
| ECC | No |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.