Origin Storage 1.92TB SATA 3.5″ Server SSD for Dell with Hot-Swap Caddy
£2,647.94
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92 TB eMLC SSD capacity
- Read speeds up to 550 MB/s
- Write speeds up to 520 MB/s
- SATA interface with 6 Gbit/s transfer rate
- 3.5-inch form factor with hot-swap caddy
- Compatible with Dell servers
- Five-year warranty
You may also like
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
Origin Storage 1.92TB SATA SSD – hot-swap server storage
The Origin Storage 1.92TB SATA SSD suits Dell server and workstation upgrades that need high-capacity, hot-swappable storage. Its included caddy supports a straightforward fit in a compatible 3.5-inch bay.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 1.92 TB |
| Interface | SATA, 6 Gbit/s |
| Form factor | 3.5-inch |
| Memory type | eMLC |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 520 MB/s |
Designed for compatible Dell systems
This drive is listed for Dell servers and includes a hot-swap caddy. That makes it suitable for supported server bays where drives can be replaced without removing the caddy from the system. Check your server model and bay requirements before ordering.
It also supports Windows and Linux. So, it can serve a range of server and workstation environments using either operating system.
Endurance for demanding workloads
The eMLC memory is paired with a 10,512 TBW endurance rating. This gives buyers a clear endurance figure when planning storage for frequent writes. The drive also supports active garbage collection and S.M.A.R.T. monitoring.
For data integrity, it includes end-to-end data protection and enhanced power-loss protection. Random performance reaches up to 95,000 IOPS for 4 KB reads and 28,000 IOPS for 4 KB writes.
Check fit and system compatibility
- Confirm your Dell server model supports this drive.
- Check that your system uses a compatible SATA connection and 3.5-inch bay.
- Confirm the 1.92 TB capacity suits your storage plan.
- Check that your server supports hot-swap drives in the intended bay.
Frequently Asked Questions
Q: Is this drive compatible with Dell servers?
A: It is listed as compatible with Dell servers. Confirm support for your specific server model before ordering.
Q: Does it support hot-swap installation?
A: Yes. The drive supports hot-swap and includes a caddy.
Q: Which operating systems does it support?
A: Windows and Linux operating systems are supported.
Q: What warranty does it include?
A: It includes a five-year warranty.
A practical choice for server upgrades
Choose the Origin Storage 1.92TB SATA SSD for a compatible Dell system that needs hot-swap storage, a 3.5-inch caddy and a substantial endurance rating. Its SATA interface and Windows and Linux support suit a range of server and workstation setups.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | eMLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 550 MB/s |
| TRIM support | Yes |
| Write speed | 520 MB/s |
| Linux operating systems supported | Yes |
| ECC | No |
| Memory type | eMLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.3 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature | -40 - 85 °C |
| ECC | No |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.