Origin Storage Mixed Workload SSD 1.92TB SATA 3.5″ for Server/Workstation
£2,941.16
In stock
In stock
Order today, get it by Mon 16 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92 TB capacity for server/workstation storage
- Mixed workload design balances read and write performance
- Sequential read and write speeds up to 500 MB/s
- 4 KB random performance: 95,000 read and 28,000 write IOPS
- SATA interface with 6 Gbit/s transfer rate
- 3.5-inch internal SSD form factor
- Endurance rated to 10,512 TBW
You may also like
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 3D TLC SATA SSD, 550MB/s Read, 500MB/s Write, for PC and Laptop
In stock
Origin Storage 1.92TB Mixed Workload SSD – balanced server storage
The Origin Storage 1.92TB Mixed Workload SSD suits server and workstation builds that need balanced read and write performance. Its 1.92TB capacity and mixed-workload design support varied storage tasks, with a 10,512 TBW rating for endurance.
Core specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 1.92TB |
| Form factor | 3.5-inch |
| Interface | Serial ATA, 6 Gbit/s |
| Sequential read speed | Up to 500MB/s |
| Sequential write speed | Up to 500MB/s |
| 4KB random performance | Up to 95,000 read IOPS and 28,000 write IOPS |
Balanced performance for varied workloads
Mixed Workload drives balance read and write performance with mid-level endurance. This makes the drive a practical fit for server or workstation storage where activity includes both reading and writing. For example, the stated 4KB performance reaches 95,000 read IOPS and 28,000 write IOPS.
Sequential speeds reach 500MB/s for both reads and writes. The Serial ATA interface transfers data at up to 6 Gbit/s, so confirm your system supports SATA before ordering.
Protection and monitoring for ongoing use
The drive includes End-to-End Data Protection and Enhanced Power Loss Data Protection technology. These features help protect data integrity during operation and power interruptions. Active garbage collection and TRIM support also help the SSD manage stored data.
S.M.A.R.T. support lets compatible systems monitor drive health. The stated MTBF is 2,000,000 hours, while the 10,512 TBW rating gives you an endurance figure to consider when planning write-heavy use.
Check fit and system support
- Confirm your server or workstation supports a 3.5-inch SATA SSD.
- Check that your system uses a Serial ATA connection, rather than NVMe.
- Confirm your operating system is Windows or Linux.
- Check your installation plans, as this drive is not hot-swappable.
Frequently Asked Questions
Q: What is the drive’s capacity?
A: It offers 1.92TB of storage.
Q: Does it use SATA or NVMe?
A: It uses Serial ATA at up to 6 Gbit/s. It is not an NVMe drive.
Q: Is the SSD hot-swappable?
A: No. The drive is not hot-swappable.
Q: Which operating systems are supported?
A: Windows and Linux operating systems are supported.
A considered choice for server and workstation storage
Choose the Origin Storage 1.92TB Mixed Workload SSD when you need substantial capacity with balanced read and write performance. Check SATA and drive-bay compatibility before ordering, particularly for systems designed around hot-swap storage.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | TLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | No |
| SSD capacity | 1.92 TB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| ECC | No |
| Memory type | TLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| Data transmission | |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 28000 IOPS |
| Maximum read (4KB) | 95000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Active garbage collection | Yes |
| TBW rating | 10512 |
| End-to-End Data Protection | Yes |
| Hot-swap | No |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 500 MB/s |
| TRIM support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| ECC | No |
| Memory type | TLC |
| Random write (4KB) | 28000 IOPS |
| Random read (4KB) | 95000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 110 µs |
| Read latency | 110 µs |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.3 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Package type | Blister |
| Packaging data | |
| Storage drive adapter included | No |
| Storage drive adapter type | 2.5" - 3.5" |
| Package type | Blister |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | No |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| Storage temperature | -40 - 85 °C |
| ECC | No |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 2.17 G |
| Non-operating vibration | 2.17 G |
| Hardware encryption | No |
| Enhanced Power Loss Data Protection technology | Yes |
| SSD form factor | 3.5" |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | No |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
| Identifiers | |
| Additional EANs | 5056006106210 |
Reviews
Clear filtersThere are no reviews yet.