Origin Storage 1.92TB SATA 3.5″ eMLC SSD for Dell Servers, 1 DWPD, Hot-Swap Caddy
£1,569.53
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92TB eMLC capacity with 1 DWPD endurance
- Read speeds up to 550MB/s, write up to 520MB/s
- SATA interface with 6Gbit/s transfer rate
- 3.5-inch form factor with hot-swap caddy
- Compatible with Dell servers and workstations
- Five-year warranty
You may also like
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 1.92TB eMLC SSD – hot-swap server storage
The Origin Storage 1.92TB eMLC SSD suits Dell server and workstation users who need high-capacity SATA storage. Its hot-swap design supports drive replacement without removing the drive from a compatible system.
Key specs for your server
| Metric | Specification |
|---|---|
| Capacity and memory | 1.92TB eMLC |
| Form factor | 3.5-inch |
| Interface | SATA, 6 Gbit/s |
| Sequential speeds | Read up to 550 MB/s; write up to 520 MB/s |
| Random 4KB performance | Read 97,000 IOPS; write 24,000 IOPS |
| Endurance | 1 DWPD; 2,733 TBW |
Replace drives with hot-swap access
Hot-swap support makes this SSD suitable for compatible Dell server bays designed for drive changes while the system remains in service. Check your server’s drive bay and caddy requirements before ordering.
The drive uses a SATA interface, not NVMe. Its 6 Gbit/s transfer rate and quoted read and write speeds help you assess its fit for your server workload.
eMLC endurance for regular server use
The eMLC memory has a rated endurance of 1 DWPD and 2,733 TBW. These figures help you compare the drive’s write endurance with your workload.
Random 4KB performance reaches 97,000 IOPS for reads and 24,000 IOPS for writes. This can help with workloads that involve frequent small data requests.
Check compatibility and fit
- Confirm your Dell server supports this SATA SSD and its 3.5-inch caddy.
- Check that your server supports hot-swap drives before replacing a drive while running.
- Confirm your operating system is Windows or Linux.
- Check that SATA storage meets your requirements, as this drive is not NVMe.
Frequently Asked Questions
Q: Is this SSD compatible with Dell servers?
A: It is designed for Dell servers. Confirm that your server model supports this SATA drive and its caddy.
Q: What are its read and write speeds?
A: Sequential speeds are up to 550 MB/s read and 520 MB/s write.
Q: Does it support hot-swapping?
A: Yes. Hot-swap support lets you change the drive in a compatible hot-swap bay.
Q: Does it include hardware encryption?
A: No. This SSD does not include hardware encryption.
A practical choice for Dell server upgrades
Choose the Origin Storage 1.92TB eMLC SSD for compatible Dell systems needing 1.92TB of hot-swappable SATA storage. It includes a five-year warranty.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | eMLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| TBW rating | 2733 |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| TBW rating | 2733 |
| Hot-swap | Yes |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Read speed | 550 MB/s |
| Write speed | 520 MB/s |
| Linux operating systems supported | Yes |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.