Origin Storage Read Intensive SSD 1.92TB SATA 3.5″ for Server/Workstation
£1,778.33
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 1.92 TB capacity for server and workstation use
- Read-intensive SSD design
- Read and write speeds up to 500 MB/s
- Random read performance up to 97,000 IOPS
- SATA interface with 6 Gbit/s transfer rate
- 3.5-inch form factor
- Windows and Linux operating system support
You may also like
Team Group NV5000 500GB M.2 PCIe 4.0 NVMe SSD
In stock
Origin Storage 256GB SATA SSD, 3D TLC, 550 MB/s Read, 500 MB/s Write
In stock
Origin Storage Read Intensive SSD 1.92TB – High-capacity SATA storage
The Origin Storage Read Intensive SSD 1.92TB suits server and workstation users who need substantial internal storage for read-focused workloads. Its 1.92TB capacity and SATA interface make it a practical choice for compatible systems.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 1.92TB |
| Form factor | 3.5-inch |
| Interface | SATA, 6Gbit/s |
| Sequential read speed | 500MB/s |
| Sequential write speed | 500MB/s |
| Intended use | Server/workstation |
Designed for read-focused workloads
Read Intensive drives are intended for workloads with more reading than writing. This makes the SSD a suitable option for server or workstation storage where access to existing data is a priority. Consider your write demands when choosing a drive for a heavily updated workload.
SATA connection for compatible systems
The drive uses a Serial ATA interface, with a data transfer rate of 6Gbit/s. It is not an NVMe drive, so check that your system supports a 3.5-inch SATA SSD before ordering. Read and write speeds are rated at 500MB/s.
Check fit and operating system support
This is an internal drive for server and workstation use. Windows and Linux operating systems are supported. However, the drive is not hot-swappable, so plan for installation in a system that can be powered down when required.
Before you order
- Confirm your server or workstation has a suitable 3.5-inch drive bay.
- Check that the system supports an internal SATA drive.
- Confirm your workload is suited to a read-intensive SSD.
- Check that your operating system is Windows or Linux.
Frequently Asked Questions
Q: What is the capacity of this SSD?
A: It has a capacity of 1.92TB.
Q: Is this an NVMe drive?
A: No. It uses a Serial ATA interface with a 6Gbit/s data transfer rate.
Q: Is the SSD hot-swappable?
A: No, this drive is not hot-swappable.
Q: Which operating systems are supported?
A: Windows and Linux operating systems are supported.
A practical choice for read-heavy storage
Choose the Origin Storage Read Intensive SSD 1.92TB if you need high-capacity internal SATA storage for a compatible server or workstation, and your workload is primarily read-focused.
| Hard drive | |
|---|---|
| SSD capacity | 1.92 TB |
| Memory type | TLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| TBW rating | 2733 |
| Hot-swap | No |
| SSD capacity | 1.92 TB |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Memory type | TLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Data transmission | |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| TBW rating | 2733 |
| Hot-swap | No |
| SSD capacity | 1.92 TB |
| Windows operating systems supported | Yes |
| Read speed | 500 MB/s |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | TLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Harmonized System (HS) code | 84717070 |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Package type | Blister |
| Packaging data | |
| Storage drive adapter included | No |
| Storage drive adapter type | 2.5" - 3.5" |
| Package type | Blister |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | No |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | No |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
| Identifiers | |
| Additional EANs | 5056006106265 |
Reviews
Clear filtersThere are no reviews yet.