Origin Storage 240GB SATA SSD, 3.5″, Hot-Swap Caddy for Dell Servers
£415.61
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Capacity: 240GB eMLC SSD
- Read/write speeds: 520/400 MB/s
- Interface: SATA, up to 6 Gbit/s
- Form factor: 3.5-inch hot-swap caddy
- Compatibility: Dell servers and workstations
- Features: TRIM, S.M.A.R.T. and RAID support
You may also like
Origin Storage 3D TLC SATA SSD, 550MB/s Read, 500MB/s Write, for PC and Laptop
In stock
Origin Storage 256GB SATA SSD for PC/Laptop, 3D TLC, 550MB/s Read, 500MB/s Write
In stock
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 240GB SATA SSD – dependable hot-swap storage for Dell servers
We recommend the Origin Storage 240GB SATA SSD for compatible Dell servers and workstations needing a hot-swap drive. Its caddy supports drive replacement without removing the server from service.
Key specifications at a glance
| Metric | Specification |
|---|---|
| Capacity | 240 GB |
| Interface | Serial ATA, 6 Gbit/s |
| Sequential read speed | Up to 520 MB/s |
| Sequential write speed | Up to 400 MB/s |
| Form factor | 3.5-inch |
| Warranty | 5 years |
Replace drives with less disruption
The hot-swap design lets you remove or install the drive while the system remains running, where the server supports hot-swap operation. This can help reduce disruption during a drive replacement or storage maintenance.
The drive is matched for Dell servers. However, server compatibility depends on the specific model and drive bay, so check these before ordering.
SATA performance for server workloads
This SSD uses a Serial ATA interface with a transfer rate of up to 6 Gbit/s. It delivers sequential read speeds of up to 520 MB/s and write speeds of up to 400 MB/s.
For smaller, random requests, it reaches up to 86,000 4KB read IOPS and 9,000 4KB write IOPS. It also supports RAID and S.M.A.R.T., helping it fit into supported server storage setups.
Caddy and drive fit
The 3.5-inch format is suited to compatible server bays. A 2.5-to-3.5-inch storage drive adapter is included, and the product has a black finish.
The drive uses eMLC NAND and supports TRIM. It is compatible with Windows and Linux operating systems, making it suitable for a range of server and workstation environments.
Check your server before ordering
- Confirm your Dell server model supports this drive and its hot-swap caddy.
- Check that the available bay accepts a 3.5-inch drive.
- Confirm your system uses a compatible SATA interface and supports hot-swap operation.
- Check that 240 GB meets your storage requirements.
Frequently Asked Questions
Q: Is this SSD compatible with Dell servers?
A: It is designed for Dell servers. Check compatibility with your specific server model and drive bay.
Q: Does the drive support hot-swap?
A: Yes. It supports hot-swap operation in a compatible server.
Q: Which operating systems does it support?
A: It supports Windows and Linux operating systems.
Q: What warranty does it include?
A: It includes a five-year warranty.
A practical choice for compatible Dell systems
Choose the Origin Storage 240GB SATA SSD when you need 240 GB of hot-swap SATA storage for a compatible Dell server or workstation. Its included adapter, RAID support and five-year warranty make it a considered option for supported systems.
| Hard drive | |
|---|---|
| SSD capacity | 240 GB |
| Memory type | eMLC |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 240 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 400 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 520 MB/s |
| Write speed | 400 MB/s |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| Product colour | Black |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 240 GB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 400 MB/s |
| Linux operating systems supported | Yes |
| Memory type | eMLC |
| Random write (4KB) | 9000 IOPS |
| Random read (4KB) | 86000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (idle) | 1.3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 54.34 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| RAID support | Yes |
| Storage temperature | -40 - 85 °C |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| Product colour | Black |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Product colour | Black |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.