Origin Storage 480GB 2.5″ SATA eMLC SSD, 1 DWPD, Hot-Swap Caddy

SKU: CPQ-480EMLCRI-S7

£869.26

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order now, get it by Tue 17 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • 480GB eMLC SSD with 1 DWPD endurance
  • Sequential read speeds up to 520 MB/s
  • Sequential write speeds up to 480 MB/s
  • 2.5-inch SATA interface, transferring up to 6 Gbit/s
  • Hot-swap caddy for servers and workstations
  • 256-bit AES hardware encryption
Description

Origin Storage 480GB SSD – hot-swap server storage

The Origin Storage 480GB SSD suits server and workstation upgrades that need a 2.5-inch SATA drive with a hot-swap caddy. Its eMLC memory and hot-swap support make it a practical choice for systems designed for drive replacement without removing the drive permanently.

Essential specifications at a glance

Metric Specification
Capacity 480 GB
Form factor 2.5-inch
Interface SATA, 6 Gbit/s
NAND type eMLC
Sequential read/write Up to 520 / 480 MB/s
Hot-swap Yes

eMLC storage for server and workstation use

This drive uses eMLC NAND and is intended for server and workstation systems. It offers 16,000 random write IOPS and 97,000 random read IOPS for 4KB operations. In practice, these figures help describe its handling of smaller, frequent data requests.

The drive also supports RAID and S.M.A.R.T. monitoring. These features can be useful in systems where administrators manage storage health and grouped drives.

Replace the drive through a hot-swap caddy

The included hot-swap caddy lets you use the drive in a compatible hot-swap bay. This can simplify replacement in systems designed for that setup. Check your system’s bay and caddy requirements before ordering.

The drive measures 2.5 inches and 7mm high. It uses a Serial ATA interface, not NVMe, so confirm your system supports SATA storage.

Hardware encryption and operating range

Hardware encryption supports 256-bit AES. The SSD also supports TRIM, which helps the drive manage used storage blocks.

Its specified operating temperature range is 0–70°C. Average power consumption is 3W.

Check compatibility before ordering

  • Confirm your server or workstation supports a 2.5-inch SATA SSD.
  • Check that its hot-swap bay accepts the supplied caddy.
  • Confirm your system supports SATA rather than requiring an NVMe drive.
  • Check that 7mm drive height suits your system’s installation.

Frequently Asked Questions

Q: What interface does this SSD use?

A: It uses a Serial ATA interface with a data transfer rate of 6 Gbit/s.

Q: Is the drive hot-swappable?

A: Yes. It has a hot-swap caddy for use in a compatible bay.

Q: Does it support hardware encryption?

A: Yes. It supports hardware encryption with 256-bit AES.

Q: What warranty comes with the SSD?

A: It comes with a five-year warranty.

A practical choice for compatible systems

Choose the Origin Storage 480GB SSD if you need eMLC storage for a compatible SATA server or workstation, with hot-swap support and hardware encryption. Its 480GB capacity and 2.5-inch form factor suit systems built for this drive type.

Specifications
Hard drive
SSD capacity480 GB
Memory typeeMLC
Access time0.1 ms
InternalYes
Data transmission
Read speed520 MB/s
Write speed480 MB/s
Random write (4KB)16000 IOPS
Random read (4KB)97000 IOPS
Write latency130 µs
Read latency130 µs
Data transfer rate6 Gbit/s
Design
InternalYes
Component forServer/workstation
SSD form factor2.5"
Security
Security algorithms256-bit AES
Endurance
Mean time between failures (MTBF)2000000 h
Features
InterfaceSerial ATA
Component forServer/workstation
Maximum write (4KB)16000 IOPS
Maximum read (4KB)97000 IOPS
NVMeNo
NAND flash typeeMLC (Enterprise Multi Level Cell)
Random read (8KB)55000 IOPS
Random write (8KB)11000 IOPS
Hot-swapYes
SSD capacity480 GB
Security algorithms256-bit AES
S.M.A.R.T. supportYes
Read speed520 MB/s
TRIM supportYes
RAID supportYes
Write speed480 MB/s
Memory typeeMLC
Random write (4KB)16000 IOPS
Random read (4KB)97000 IOPS
Mean time between failures (MTBF)2000000 h
Write latency130 µs
Read latency130 µs
Hardware encryptionYes
Data transfer rate6 Gbit/s
Access time0.1 ms
SSD form factor2.5"
Harmonized System (HS) code84717070
Power
Power consumption (average)3 W
Performance
InterfaceSerial ATA
Component forServer/workstation
Maximum write (4KB)16000 IOPS
Maximum read (4KB)97000 IOPS
NVMeNo
NAND flash typeeMLC (Enterprise Multi Level Cell)
Random read (8KB)55000 IOPS
Random write (8KB)11000 IOPS
Hot-swapYes
SSD capacity480 GB
Security algorithms256-bit AES
S.M.A.R.T. supportYes
Read speed520 MB/s
TRIM supportYes
RAID supportYes
Write speed480 MB/s
Memory typeeMLC
Random write (4KB)16000 IOPS
Random read (4KB)97000 IOPS
Mean time between failures (MTBF)2000000 h
Write latency130 µs
Read latency130 µs
Hardware encryptionYes
Data transfer rate6 Gbit/s
Access time0.1 ms
Weight & dimensions
Width69.8 mm
Weight60 g
Height7 mm
Depth100.5 mm
Operational conditions
Operating temperature0 - 70 °C
Storage temperature-40 - 85 °C
Operating relative humidity5 - 95%
Operating shock1500 G
Non-operating shock1500 G
Operating vibration20 G
Non-operating vibration20 G
Technical details
InterfaceSerial ATA
Hot-swapYes
S.M.A.R.T. supportYes
Operating temperature0 - 70 °C
TRIM supportYes
RAID supportYes
Storage temperature-40 - 85 °C
Operating relative humidity5 - 95%
Operating shock1500 G
Non-operating shock1500 G
Operating vibration20 G
Non-operating vibration20 G
Hardware encryptionYes
SSD form factor2.5"
Warranty period5 years
Other features
InternalYes
Warranty period5 years
Logistics data
Harmonized System (HS) code84717070

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.