Origin Storage 480GB SATA SSD, 3.5″, 1 DWPD, Hot-Swap Caddy for Dell Servers
£773.65
In stock
In stock
Order today, get it by Mon 16 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 480GB eMLC SSD with 1 DWPD endurance
- Read speeds up to 520MB/s, write up to 500MB/s
- 3.5-inch form factor with hot-swap caddy
- Serial ATA interface with 6Gbit/s transfer rate
- Compatible with Dell servers
- Supports RAID and S.M.A.R.T.
- Warranty period of five years
You may also like
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 480GB SATA SSD – Hot-swap storage for Dell servers
The Origin Storage 480GB SATA SSD suits compatible Dell servers and workstations needing dependable, serviceable storage. Its hot-swap caddy lets you replace or install the drive without removing it from the server.
Key details for server upgrades
| Metric | Specification |
|---|---|
| Capacity | 480 GB |
| Interface | SATA, 6 Gbit/s |
| Sequential read speed | Up to 520 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Form factor | 3.5-inch, with 2.5-inch to 3.5-inch adapter |
| Drive endurance | 1 DWPD |
Replace storage with less disruption
Hot-swap support makes this SSD useful for server environments where access to drive bays matters. The drive comes in a 3.5-inch caddy, with an adapter for 2.5-inch to 3.5-inch fitment. Check that the caddy suits your server before ordering.
Match performance to server workloads
The SATA interface transfers data at up to 6 Gbit/s. Rated sequential speeds reach 520 MB/s for reads and 500 MB/s for writes. Its eMLC NAND and 1 DWPD rating make it a server-focused choice for regular workloads.
The SSD supports RAID and S.M.A.R.T., which can help with array use and drive monitoring. It also supports Windows and Linux operating systems. This model uses SATA rather than NVMe, so confirm that your server requires a SATA drive.
Check your server fit
- Confirm your Dell server model supports this drive and its hot-swap caddy.
- Check that your server has a compatible 3.5-inch drive bay.
- Confirm your storage controller supports SATA and your intended RAID setup.
- Check that your operating system is Windows or Linux.
Common questions
Q: Is this SSD hot-swappable?
A: Yes. It is supplied in a hot-swap caddy for compatible Dell servers.
Q: What interface does the drive use?
A: It uses SATA with a data transfer rate of 6 Gbit/s. It is not an NVMe drive.
Q: Does it support RAID?
A: Yes. The SSD supports RAID, although compatibility depends on your server and storage controller.
Q: What warranty does it include?
A: It includes a five-year warranty.
A practical choice for Dell server storage
Choose the Origin Storage 480GB SATA SSD for a compatible Dell server when you need a hot-swap SATA drive with 480 GB capacity. Its caddy, RAID support and five-year warranty make it a considered option for server upgrades.
| Hard drive | |
|---|---|
| SSD capacity | 480 GB |
| Memory type | eMLC |
| Access time | 0.1 ms |
| Internal | Yes |
| Performance | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 16000 IOPS |
| Maximum read (4KB) | 97000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Random read (8KB) | 55000 IOPS |
| Random write (8KB) | 11000 IOPS |
| Hot-swap | Yes |
| SSD capacity | 480 GB |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 500 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| Compatible products | Dell Server |
| Data transmission | |
| Read speed | 520 MB/s |
| Write speed | 500 MB/s |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Security | |
| Security algorithms | 256-bit AES |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| Maximum write (4KB) | 16000 IOPS |
| Maximum read (4KB) | 97000 IOPS |
| NVMe | No |
| NAND flash type | MLC (Multi Level Cell) |
| Random read (8KB) | 55000 IOPS |
| Random write (8KB) | 11000 IOPS |
| Hot-swap | Yes |
| SSD capacity | 480 GB |
| Windows operating systems supported | Yes |
| Security algorithms | 256-bit AES |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 500 MB/s |
| Linux operating systems supported | Yes |
| Memory type | eMLC |
| Random write (4KB) | 16000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Access time | 0.1 ms |
| SSD form factor | 3.5" |
| Compatible products | Dell Server |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| System requirements | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Operational conditions | |
| Operating temperature | 0 - 70 °C |
| Storage temperature | -40 - 85 °C |
| Operating relative humidity | 5 - 95% |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| Operating temperature | 0 - 70 °C |
| TRIM support | Yes |
| RAID support | Yes |
| Storage temperature | -40 - 85 °C |
| Operating relative humidity | 5 - 95% |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Software | |
| Windows operating systems supported | Yes |
| Linux operating systems supported | Yes |
| Other features | |
| Internal | Yes |
| Compatible products | Dell Server |
| Warranty period | 5 years |
| Compliance certificates | RoHS |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.