Origin Storage 960GB SAS 2.5″ SSD, Equivalent to HPE P19903-B21

Origin Storage P19903-B21 – 960GB SAS storage for servers

The Origin Storage P19903-B21 suits server and workstation users who need a 2.5-inch SAS SSD. Its 960GB capacity provides room for data and applications, while the hot-swap caddy supports installation in a compatible drive bay.

Key specs at a glance

SAS performance for server use

This drive uses a SAS interface, not NVMe. Its stated read speed is 2,000MB/s, with writes up to 1,000MB/s. Actual performance depends on the host system and workload.

The SSD is designed for server and workstation use. It also includes ECC, which helps detect and correct errors in stored data.

Fit the caddy to your system

The 2.5-inch drive comes in a hot-swap caddy. However, the drive and caddy must match your server’s bay and backplane. Check the required drive type before ordering.

This model is equivalent to HPE part P19903-B21. Confirm that your server supports this part or the corresponding Origin Storage drive. Compatibility depends on the specific system.

Check before you order

• Confirm your server or workstation supports SAS drives.
• Check that your system has a compatible 2.5-inch drive bay and backplane.
• Confirm that HPE P19903-B21 or its equivalent is suitable for your system.
• Check that your system’s operating environment falls within 0–70°C.

Frequently Asked Questions

Q: Is this an NVMe SSD?

A: No. It uses a SAS interface and is not an NVMe drive.

Q: What are the read and write speeds?

A: The stated read speed is up to 2,000MB/s, and the write speed is up to 1,000MB/s.

Q: Does it include ECC?

A: Yes. This SSD supports ECC.

Q: What warranty does it include?

A: It includes a five-year warranty.

A practical choice for compatible servers

Choose the Origin Storage P19903-B21 if you need a 960GB SAS SSD in a 2.5-inch hot-swap caddy for a compatible server or workstation. Its SAS interface, ECC support and five-year warranty make it a considered option for supported systems.