Origin Storage 960GB eMLC SATA SSD, 3.5″ Read-Intensive 1DWPD Hot-Swap Caddy
£1,194.32
In stock
In stock
Order now, get it by Tue 17 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- 960 GB eMLC enterprise SSD capacity
- Read speed up to 520 MB/s
- Write speed up to 480 MB/s
- 6 Gbit/s Serial ATA interface
- 3.5-inch hot-swap caddy with adapter
- For server and workstation use
- Five-year warranty and 1 DWPD endurance
You may also like
Origin Storage 256GB SATA SSD for PC/Laptop, 3D TLC, 550MB/s Read, 500MB/s Write
In stock
Origin Storage 256GB SATA SSD, 3D TLC, 550 MB/s Read, 500 MB/s Write
In stock
ADATA Legend 700 256GB NVMe M.2 2280 Internal SSD PCIe 3.0 x4
In stock
Origin Storage 960GB eMLC SATA SSD – hot-swap server storage
The Origin Storage 960GB eMLC SATA SSD suits servers and workstations needing read-focused storage. Its hot-swap caddy supports straightforward drive changes in compatible systems.
Key specs at a glance
| Metric | Specification |
|---|---|
| Capacity | 960 GB |
| Memory type | eMLC |
| Interface | SATA, 6 Gbit/s |
| Form factor | 3.5-inch |
| Sequential speeds | Up to 520 MB/s read, 480 MB/s write |
| Endurance | Read-intensive, 1 DWPD |
Built for read-heavy server workloads
This drive uses eMLC NAND and a read-intensive 1 DWPD endurance rating. It is intended for server and workstation use where read activity is a priority. Check your workload and endurance requirements before choosing a drive.
Sequential speeds reach 520 MB/s for reading and 480 MB/s for writing. For smaller file operations, it delivers up to 97,000 random read IOPS and 24,000 random write IOPS.
Hot-swap caddy for compatible systems
The supplied 3.5-inch format and hot-swap design can suit a compatible server or workstation bay. The drive also supports RAID, S.M.A.R.T. monitoring and TRIM. These features can help with array use, drive health checks and storage maintenance.
The interface is SATA, not NVMe. Confirm that your system supports this drive and caddy before ordering. Its 130-microsecond read and write latency provides another useful point of reference when assessing storage performance.
Check fit and compatibility
- Confirm your server or workstation supports a 3.5-inch hot-swap SATA drive.
- Check that the system’s bay and caddy support this drive format.
- Confirm your SATA controller and RAID setup support the drive.
- Check that 960 GB capacity and 1 DWPD endurance suit your workload.
Frequently Asked Questions
Q: What is the drive capacity?
A: It has 960 GB of storage.
Q: Does it support hot-swap use?
A: Yes. It is a hot-swap drive in a 3.5-inch caddy.
Q: Is this an NVMe SSD?
A: No. It uses a SATA interface with a 6 Gbit/s data transfer rate.
Q: What warranty does it include?
A: It includes a five-year warranty.
A practical choice for read-focused storage
Choose the Origin Storage 960GB eMLC SATA SSD for a compatible server or workstation that needs 960 GB of read-intensive storage. Its eMLC memory, hot-swap caddy and RAID support make it suitable for planned enterprise storage deployments.
| Hard drive | |
|---|---|
| SSD capacity | 960 GB |
| Memory type | eMLC |
| Internal | Yes |
| Data transmission | |
| Read speed | 520 MB/s |
| Write speed | 480 MB/s |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Data transfer rate | 6 Gbit/s |
| Design | |
| Internal | Yes |
| Component for | Server/workstation |
| SSD form factor | 3.5" |
| Endurance | |
| Mean time between failures (MTBF) | 2000000 h |
| Features | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | eMLC (Enterprise Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 960 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 480 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| SSD form factor | 3.5" |
| Harmonized System (HS) code | 84717070 |
| Power | |
| Power consumption (average) | 3 W |
| Performance | |
| Interface | Serial ATA |
| Component for | Server/workstation |
| NVMe | No |
| NAND flash type | eMLC (Enterprise Multi Level Cell) |
| Hot-swap | Yes |
| SSD capacity | 960 GB |
| S.M.A.R.T. support | Yes |
| Read speed | 520 MB/s |
| TRIM support | Yes |
| RAID support | Yes |
| Write speed | 480 MB/s |
| Memory type | eMLC |
| Random write (4KB) | 24000 IOPS |
| Random read (4KB) | 97000 IOPS |
| Mean time between failures (MTBF) | 2000000 h |
| Write latency | 130 µs |
| Read latency | 130 µs |
| Hardware encryption | No |
| Data transfer rate | 6 Gbit/s |
| Weight & dimensions | |
| Width | 69.8 mm |
| Weight | 60 g |
| Height | 7 mm |
| Depth | 100.5 mm |
| Packaging data | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Operational conditions | |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Technical details | |
| Interface | Serial ATA |
| Hot-swap | Yes |
| S.M.A.R.T. support | Yes |
| TRIM support | Yes |
| RAID support | Yes |
| Operating shock | 1500 G |
| Non-operating shock | 1500 G |
| Operating vibration | 20 G |
| Non-operating vibration | 20 G |
| Hardware encryption | No |
| SSD form factor | 3.5" |
| Warranty period | 5 years |
| Other features | |
| Internal | Yes |
| Warranty period | 5 years |
| Packaging content | |
| Storage drive adapter included | Yes |
| Storage drive adapter type | 2.5" - 3.5" |
| Logistics data | |
| Harmonized System (HS) code | 84717070 |
Reviews
Clear filtersThere are no reviews yet.