NETGEAR GS108 8-Port Gigabit Ethernet Switch, Unmanaged, 10/100/1000 Mbps, No PoE
£38.98
In stock
In stock
- Free Premium delivery on UK mainland orders
Order today, get it by Fri 20 Nov
-
DPD tracked delivery
-
Buy now, pay later with Klarna at checkout
-
Pay in 3 instalments with PayPal at checkout
About this item
- Eight auto-sensing RJ-45 Ethernet ports
- 10/100/1000 Mbps Gigabit Ethernet connectivity
- 16 Gbit/s switching capacity
- IEEE 802.3ab, 802.3i and 802.3u standards
- Unmanaged switch for simple network expansion
- 235.5 × 100.8 × 27 mm dimensions
- No Power over Ethernet support
You may also like
TP-Link 24-Port Gigabit Network Switch
In stock
TP-Link TL-SG1024 Unmanaged Gigabit Switch
In stock
NETGEAR GS108 – add eight wired network connections
The NETGEAR GS108 suits home offices and small workspaces that need more wired Ethernet connections. Its eight auto-sensing Gigabit ports support devices running at 10, 100 or 1,000 Mbps, making it straightforward to connect equipment with different network speeds.
The essentials at a glance
| Metric | Specification |
|---|---|
| Ethernet ports | 8 auto-sensing RJ-45 |
| Port speeds | 10/100/1000 Mbps |
| Switch type | Unmanaged |
| Switching capacity | 16 Gbit/s |
| Power over Ethernet | No |
| Dimensions | 235.5 x 100.8 x 27 mm |
Connect devices at their supported speed
Each port detects the connected device’s Ethernet speed automatically. This lets you connect compatible 10 Mbps, 100 Mbps and Gigabit Ethernet equipment to the same switch.
The GS108 supports full-duplex communication and has a switching capacity of 16 Gbit/s. In practice, it provides a simple way to extend wired connectivity without configuring switch settings.
Simple, quiet operation
As an unmanaged switch, the GS108 is designed for straightforward network expansion. Connect your Ethernet devices and cabling, then use it as part of your wired network.
Its fanless design operates silently, which can suit desks and other shared workspaces. The switch does not provide PoE, so connected devices that need power require their own power source.
Check your setup before ordering
- Confirm your network devices have Ethernet connections compatible with RJ-45 cabling.
- Check that you have UTP Category 5 or better cables.
- Confirm each PC or server has a network card and network software.
- Check that connected devices have their own power, as this switch does not supply PoE.
Frequently Asked Questions
Q: How many devices can I connect?
A: The switch has eight auto-sensing UTP RJ-45 Ethernet ports.
Q: What speeds do the ports support?
A: Each port supports 10, 100 or 1,000 Mbps and senses the connected device’s speed.
Q: Does the GS108 provide Power over Ethernet?
A: No. Connected devices that need power require their own power source.
Q: Which operating systems are compatible?
A: It is compatible with Windows, Linux and Mac OS.
A practical choice for wired expansion
Choose the NETGEAR GS108 if you need eight Ethernet connections and want uncomplicated, silent operation. Its auto-sensing ports accommodate a mix of supported network speeds, while its unmanaged design keeps setup simple.
| Ports & interfaces | |
|---|---|
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| I/O ports | 8 auto speed(10/100/1000) sensing UTP RJ-45 |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Performance | |
| Packet buffer memory | 0.032 MB |
| Minimum system requirements | - UTP Category 5 or better cables -Network card for each PC or server (e.g. GA302T) -Network software |
| Compatible operating systems | Windows, Linux, Mac OS |
| Harmonized System (HS) code | 85176990 |
| Technical details | |
| Rack mounting | No |
| Management features | |
| Switch type | Unmanaged |
| Network | |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| Networking standards | IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u |
| Full duplex | Yes |
| Data transmission | |
| Packet buffer memory | 0.032 MB |
| MAC address table | 8000 entries |
| Switching capacity | 16 Gbit/s |
| Maximum data transfer rate | 1 Gbit/s |
| Protocols | |
| Data link protocols | Ethernet,Fast Ethernet, Gigabit Ethernet |
| Certificates | |
| Safety | UL (UL 1950), CUL, C-Tick |
| Electromagnetic emissions | CE mark, commercial FCC Part 15 Class A, EN 55 022 (CISPR 22), Class A VCCI, Class A C-Tick |
| Memory | |
| Packet buffer memory | 0.032 MB |
| Design | |
| Safety | UL (UL 1950), CUL, C-Tick |
| LED indicators | Power |
| Rack mounting | No |
| Indication | |
| LED indicators | Power |
| System requirements | |
| Minimum system requirements | - UTP Category 5 or better cables -Network card for each PC or server (e.g. GA302T) -Network software |
| Compatible operating systems | Windows, Linux, Mac OS |
| Power | |
| Power consumption (typical) | 14 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | No |
| Operational conditions | |
| Operating temperature | 0 - 40 °C |
| Operating relative humidity | 10 - 90% |
| Weight & dimensions | |
| Weight | 760 g |
| Logistics data | |
| Harmonized System (HS) code | 85176990 |
| Other features | |
| Latency | (100 to 100 Mbps): 40 µ (max), (1000 to 1000 Mbps): 10 µ (max) |
| Data transfer rate | 1000 Mbit/s |
| Dimensions (WxDxH) | 235.5 x 100.8 x 27 mm |
| Power requirements | 5 V @ 2.8 A DC |
| I/O ports | 8 auto speed(10/100/1000) sensing UTP RJ-45 |
| Electromagnetic emissions | CE mark, commercial FCC Part 15 Class A, EN 55 022 (CISPR 22), Class A VCCI, Class A C-Tick |
| Identifiers | |
| Additional EANs | 5054629030257 |

Reviews
Clear filtersThere are no reviews yet.