Seagate Exos 7E10 ST6000NM019B Enterprise Hard Drive, 6 TB, SATA III, 3.5″, 7200 RPM

SKU: ST6000NM019B

£371.95

In stock

In stock

  • Free Premium delivery on UK mainland orders

Order now, get it by Fri 20 Nov

  • DPD DPD tracked delivery
  • Klarna Buy now, pay later with Klarna at checkout
  • PayPal Pay in 3 instalments with PayPal at checkout

About this item

  • Enterprise HDD designed for disk arrays
  • 6 TB capacity for unstructured data
  • 7200 RPM spindle speed
  • SATA III interface, 6 Gbit/s transfer rate
  • 3.5-inch form factor, 26.1 mm height
  • 256 MB storage buffer
  • 24/7 operation, 2 million-hour MTBF
Description

Seagate Exos 7E10 6TB – storage for enterprise arrays

We recommend the Seagate Exos 7E10 6TB for enterprise storage and disk arrays that need capacity for unstructured data. Its 24/7 operation rating suits systems designed to run continuously.

Key specs at a glance

Metric Specification
Capacity 6 TB
Drive type and size HDD, 3.5-inch
Interface SATA III, 6 Gbit/s
Rotational speed 7,200 RPM
Buffer 256 MB
MTBF 2,000,000 hours

Built for continuous operation

This drive is rated for 24/7 operation, making it suitable for storage systems that stay switched on. It is designed for enterprise workloads, including disk array use. Rotational vibration sensors help the drive operate in environments where vibration matters.

Capacity with a familiar SATA interface

The 6 TB capacity gives you room for large volumes of unstructured data. SATA III provides an interface transfer rate of 6 Gbit/s, while the 256 MB buffer supports drive operations. Actual system performance also depends on the rest of your storage setup.

Check your system before ordering

  • Confirm your chassis supports a 3.5-inch drive and its 147 × 101.8 × 26.1 mm dimensions.
  • Check that your system or array supports a 6 TB SATA III drive.
  • Confirm your setup provides the required 5 V and 12 V operating voltages.
  • Check that the drive’s 5–60 °C operating temperature range suits its installation environment.

Frequently Asked Questions

Q: Is this a 3.5-inch hard drive?

A: Yes. It is a 3.5-inch HDD, measuring 147 mm deep, 101.8 mm wide and 26.1 mm high.

Q: What interface does it use?

A: It uses Serial ATA III, with an interface transfer rate of 6 Gbit/s.

Q: Is it rated for continuous operation?

A: Yes. The drive is rated for 24/7 operation and has an MTBF of 2,000,000 hours.

Q: What is the drive’s rotational speed?

A: It spins at 7,200 RPM and has an average latency of 4.16 ms.

A practical choice for always-on storage

Choose the Seagate Exos 7E10 6TB for an enterprise storage system or disk array that needs 6 TB capacity and a drive rated for continuous operation. Check your system’s physical, interface and voltage requirements before ordering.

Specifications
Hard drive
Component forDisk array
HDD interface transfer rate6 Gbit/s
Average latency4.16 ms
Mean time between failures (MTBF)2000000 h
HDD speed7200 RPM
HDD size3.5"
HDD capacity6 TB
Features
TypeHDD
Component forDisk array
HDD interface transfer rate6 Gbit/s
InterfaceSerial ATA III
Average latency4.16 ms
Mean time between failures (MTBF)2000000 h
HDD speed7200 RPM
HDD size3.5"
HDD capacity6 TB
Storage drive buffer size256 MB
Uncorrectable Bit Error Rate (UBER)< 1 per 10^15 bits read
Rotational Vibration (RV) sensorsYes
24/7 operationYes
Power
Power consumption (typical)11.03 W
Power consumption (idle)7.06 W
Operating voltage5 / 12 V
Operational conditions
Operating temperature5 - 60 °C
Operating shock70 G
Non-operating vibration5 G
Non-operating shock300 G
Technical details
Harmonized System (HS) code84717050
InterfaceSerial ATA III
Mean time between failures (MTBF)2000000 h
Weight & dimensions
Width101.8 mm
Weight716 g
Height26.1 mm
Depth147 mm
Logistics data
Harmonized System (HS) code84717050
Other features
InterfaceSerial ATA III
Identifiers
Additional EANs5715063258705

Reviews

0 reviews
0
0
0
0
0

There are no reviews yet.

Write a review

Your email is never published.

You have to be logged in to be able to add photos to your review.