VIDA Infinity02 120mm White CPU Fan

VIDA Infinity02 | 120mm PWM Fan with Multi-Zone Illumination

The VIDA Infinity02 120mm Processor Fan 12 cm White 1 pc(s) is a 120mm cooling solution designed for PC builders in the UK. It combines hydraulic bearing performance with multi-zone LED illumination. This single fan kit targets users upgrading a processor cooler or case airflow. Because it uses a 4-pin connector, it supports PWM control for variable speed. Also, the white finish suits light-themed builds. In practice, the fan balances airflow and acoustics for daily use.

Slim Specifications

Quiet Hydraulic Bearing Operation

The fan uses a hydraulic bearing with a 40,000-hour MTBF. This design reduces friction and extends service life. Because the rotational speed ranges from 800 to 1800 RPM, it can run quietly at low loads. However, at full speed the noise level reaches 38.8 dB. So, it suits users who want reliable cooling without excessive noise.

Multi-Zone LED Illumination

This model features multi-colour LED illumination with a 3-pin LED connector. The lighting can synchronise with supported motherboards for a unified look. Also, the white housing complements the RGB effect. Because the LED power consumption is 5 W, ensure your controller or motherboard header can supply the required current.

Compact 120mm Form Factor

The fan measures 120 x 120 x 25 mm. This standard size fits most 120mm radiator mounts and case fan positions. Because the thickness is 25 mm, check clearance in tight SFF cases. Also, the 9-blade design balances static pressure and airflow for processor coolers.

PWM Control for Flexible Cooling

The 4-pin PWM connector allows dynamic speed control. This lets the system adjust RPM based on temperature sensors. So, you can set a quiet profile during idle and increase cooling under load. Because the minimum speed is 800 RPM, it maintains baseline airflow even at low duty cycles.

In the box

• 1 x VIDA Infinity02 120mm White Fan
• Mounting screws (if provided by manufacturer)

Before you order

• Confirm your case has a 120mm fan mount with 25mm clearance.
• Confirm your motherboard has a 4-pin PWM header for the fan.
• Confirm your motherboard has a 3-pin ARGB header for the LED illumination.
• Confirm the white colour matches your build aesthetic.

Buyer FAQs

Final thoughts

Choose this fan if you need a 120mm PWM cooler with white aesthetics and multi-zone lighting. It suits builders upgrading a processor heatsink or adding case airflow. Because it uses standard mounts and connectors, integration is straightforward. Covered by the applicable manufacturer warranty.